User manual SONY XCRW700

[. . . ] COMPACT DISC RECORDER GRABADORA DE DISCOS COMPACTOS ENREGISTREUR DE DISQUE COMPACT XC-RW700 OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D'EMPLOI En (English) E (Español) F (Français) For assistance and information, call toll free 1-800-BUY-AIWA. (United States and Puerto Rico) 8A-AJ2-901-21 001101CMK-H-L U WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN "CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. " Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to aler t the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 4 Ventilation - The unit should be situated with adequate space around it so that proper heat ventilation is assured. [. . . ] 9 TRACK INCR Press to increase the track number. 0c Use as a play and enter button. !a Press to pause and resume playback. @ wREC Press to begin a manual recording. # r, t Press to skip to the next/previous track. ^ CD-R/RW/DISP Press to cycle through time-display options for the disc in the record deck. & CD-R/RW/z Press to open the record deck. * DUAL Press to enable both CD decks to play back at the same time and function as independent CD units. ( CD-R/RW/SEL Press to control or program the functions of the disc in the record deck. ) PRGM Press to begin the programming sequence for one of the CD decks. - RANDOM Press to begin random play of all tracks on a disc. = PRGM CHECK Press to check or edit a programmed playback sequence. [ REPEAT Press to repeat a current track or an entire disc. ]A B Press to specify a segment of a disc for repeat play. \ CLEAR Press to clear an item in a program sequence. ; SPEED Press to select the recording speed for internal dubbings. ' DUBBING Press to begin a dubbing. , ERASE Press to erase a track or an entire CD-RW disc or to unfinalize a disc. FINALIZE Press when a recording is complete to initiate the finalization process. / f, g Press and hold to play the selected disc in reverse or fast forward mode to locate a desired passage. En ENGLISH 9 CONNECTIONS To prevent possible damage to your speakers or other components in your audio system, all system components, including this unit, should be turned off and unplugged from their AC power source when any connections are made or a new component is installed. Precautions when operating this unit Never move or tilt this unit or subject it to mechanical shock when recording or playback is in progress. The disc spinning at high speed may be damaged. XC-RW700 ANALOG CD COAXIAL CD OUT L OUT OUT A-1 B-1 R A-2 B-2 DIGITAL IN DIGITAL OUT OUT R L IN CD-R/RW IN CD-R/RW C-1 C-2 C-3 CD-R/RW OPTICAL B-3 A-3 CD-R/RW CD OPTICAL TAPE rec/out coaxial rec/out optical rec/out play/in play/in play/in Receiver Preamp CD input analog coaxial optical 10 ENGLISH PLAY DECK CONNECTIONS OUTPUT JACKS: A-1 ANALOG Connect the ANALOG CD OUT jacks to the CD input analog jacks on your receiver, preamp or surround processor. A-2 COAXIAL Connect the COAXIAL CD OUT to the CD input coaxial jack of your receiver, preamp, processor or external digital decoder. A-3 OPTICAL Connect the OPTICAL CD DIGITAL OUT to the CD input optical jack of your receiver, preamp, processor or external digital decoder. Using the DIGITAL IN (OPTICAL) jack on the front panel Connections to a portable digital CD or MD player may be made by connecting the digital output of the player to the front panel DIGITAL IN (OPTICAL) jack on this unit. [. . . ] Press CD/SEL to control the play deck; press CD-R/RW/SEL to control the record deck. Finalize the CD-R/RW disc in the unit's record deck. (see page 18) Wrong deck selected. Sensor blocked Dead batteries Disc cannot be erased. Recorded CD-R/RW disc does not play in another CD player or "DISC ERROR" appears in play deck display. [. . . ]