User manual SONY XDAX10

[. . . ] 3-081-707-11(1) CD/DVD Player Operating Instructions For customers in the U. S. A Owner's Record The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Aiwa dealer regarding this product. XD-AX10 Serial No. ______________ For assistance and information visit us on the internet at www. us. aiwa. com call toll free 1-800-BUY-AIWA For Customers in Canada If this product is not working properly, please call 1-877-869-2492 for Peace of Mind Warranty Replacement service. [. . . ] When Program Play or Shuffle Play is activated · ON: repeats Program Play or Shuffle Play. 34 To return to normal play Press CLEAR, or select "OFF" in Step 2. z Hints · You can set Repeat Play while the player is stopped. After selecting the "REPEAT" option, press H. · You can also select "REPEAT" from the Control Bar (page 13). 3 During playback, when you find the starting point (point A) of the portion to be played repeatedly, press ENTER. The starting point (point A) is set. A13 ­ 0:27:34 B Playing Discs Note You cannot use this function with VIDEO CDs with PBC playback. 4 When you reach the ending point (point B), press ENTER again. The set points are displayed and the player starts repeating this specific portion. Repeating a specific portion (AB Repeat Play) You can play a specific portion of a title, chapter or track repeatedly. (This function is useful when you want to memorize lyrics, etc. ) To return to normal play Press CLEAR. To turn off the Control Bar Press DISPLAY repeatedly until the Control Bar is turned off. Note CLEAR When you set A-B Repeat Play, the settings for Shuffle Play, Repeat Play, and Program Play are canceled. ENTER DISPLAY 1 Press DISPLAY during playback. The following Control Bar appears. 2 Press C/c to select REPEAT). (A-B 35 Playback direction ×2B t 1M t 2M t 3M Searching for a Scene Searching for a Particular Point on a Disc (Scan, Slow-motion Play, Search, Freeze Frame) You can quickly locate a particular point on a disc by monitoring the picture or playing back slowly. 3M (DVD/VIDEO CD only) ×2B (DVD/CD only) Opposite direction ×2b t 1m t 2m t 3m 3m (DVD/VIDEO CD only) ×2b (DVD only) The "×2B"/"×2b" playback speed is about twice the normal speed. The "3M"/"3m" playback speed is faster than "2M"/"2m" and the "2M"/"2m" playback speed is faster than "1M"/ "1m. " Watching frame by frame (Slowmotion play) STEP STEP Press m or M when the player is in pause mode. Each time you press m or M during Slow-motion play, the playback speed changes. With each press the indication changes as follows: Playback direction 2 2 y1 y1 " playback speed is slower . " Opposite direction (DVD only) Note Depending on the DVD/VIDEO CD, you may not be able to do some of the operations described. The "2 y"/"2 than "1 y"/"1 Locating a point quickly by playing a disc in fast forward or fast reverse (Scan) Press m or M while playing a disc. When you find the point you want, press H to return to normal speed. Each time you press m or M during scan, the playback speed changes. With each press the indication changes as follows: To locate a point quickly using the PREV (previous)/NEXT button (Search) You can search for a particular point on a disc using . During playback, press and hold > on the player to locate a point in the playback direction, or press and hold . to locate a point in the opposite direction. When you find the point you want, release the button to return to normal playback speed. 36 Playing one frame at a time (Freeze Frame) When the player is in the pause mode, press STEP to go to the next frame. Press STEP to go to the preceding frame (DVD only). If you hold the button down, you can view the frames in succession. To return to normal playback, press H. Searching for a Title/ Chapter/Track/Scene, etc. (Search mode) You can search a DVD by title or chapter, and you can search a VIDEO CD/CD by track, index, or scene. As titles and tracks are assigned unique numbers on the disc, you can select the desired one by entering its number. Or, you can search for a scene using the time code. Searching for a Scene Number buttons CLEAR SEARCH MODE ENTER 1 Press SEARCH MODE. The following display appears. "-- (**)" appears next to the icon (** refers to a number). The number in parentheses indicates the total number of titles, tracks, indexes, scenes, etc. of the disc. ­ ­(10) , continued 37 2 Press SEARCH MODE repeatedly to select the search method. When playing a DVD TITLE CHAPTER TIME/TEXT NUMBER INPUT Select "TIME/TEXT" to search for a starting point by inputting the time code. [. . . ] Good channel separation is realized because all of the channel data are recorded discretely and little deterioration is realized because all channel data processing is digital. The picture data uses the MPEG 2 format, one of the worldwide standards of digital compression technology. The picture data is compressed to about 1/40 (average) of its original size. The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture. Audio information is recorded in a multi-channel format, such as Dolby Digital, allowing you to enjoy a more real audio presence. [. . . ]