User manual SONY XDDW1

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. [. . . ] Within 10 seconds press i or k to select "PRG", then press ENTER. Then go to step 4. Press j or l to select the number of the track you want to program. Then press ENTER. PROGRAM MENU DISC 1 6 11 16 21 2 7 12 17 22 3 8 13 18 23 4 9 14 19 5 10 15 20 7 -----RETURN START PROGRAM -18 3 - - - -- -- -- --- -- -- --- -- -- --- -- -- --- -- -C AC If you enter the wrong number Press C to delete the number. 5 21 ENGLISH Repeat step 4 to program other tracks. 6 Press ikjl to select "START", then press ENTER. Playback begins from the specified track. You can also start playback with c(Play). PROGRAM MENU Random playback (Video CD with PBC off, audio CD) You can playback tracks in random order. (Random playback) DISC 1 6 11 16 21 2 7 12 17 22 3 8 13 18 23 4 9 14 19 5 10 15 20 7 -----RETURN START PROGRAM -18 3 - - - -- -- -- --- -- -- --- -- -- --- -- -- --- -- -- -C AC 1 Either when playing, or while the resume function is active, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. To delete a programed track On the programing screen, select "C" with j or l. You can also delete the last program with C on the remote control. 2 Press j or l to select the "Playback mode" icon. OFF To clear the programed contents At the programing screen, select "AC" with j or l. When s is pressed twice, the disc cover is opened, or the power is turned off, all the programed contents are also cleared. 3 Press i or k to select "RND". RND Adding a programed track in stop mode Show the programing screen and select tracks. The selected track is programed to the last position. 4 Press ENTER. Random playback begins. To operate with the PROGRAM button To cancel programed playback Press s. Programed playback is canceled by stopping playback. NOTE During programed playback, the on screen display cannot be used. Press PROGRAM on the remote control either when playing, or while the resume function is active. Within 10 seconds, press i or k to select "RND", then press ENTER. To cancel random playback Press s. · shows the "dts" during playback of a DVD with dts. NOTES · When playing a DVD with soundtracks in multiple languages, the audio will automatically be played in the language which was selected when the DVD player was set up. If there is not a soundtrack in that language on the disc, the disc will determine which audio track is played. · The audio track may only be changed for discs which contain multiple audio tracks. · The number of audio tracks available differs from disc to disc. 1 While playing, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. 2 Press j or l to select the "Audio track" icon. 0:06:30 1= Q EN 2ch OFF 3 Press i or k to select the audio track. The audio track will change each time you press i or k. 0:06:30 2= Q SP 2ch OFF When using the AUDIO SELECT button Press AUDIO SELECT on the remote control during playback. The audio track will change each time you press the button. 27 ENGLISH Selecting karaoke audio (video CD, DVD) The method of recording the vocal audio may differ from disc to disc. This DVD player allows you to select the right method for the disc, so that you can use any karaoke disc. Video CD karaoke: DVD karaoke: 1 Either when playing, or while the resume function is active, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. 1 While playing, press DISPLAY on the main unit or ONSCREEN DISPLAY ON/OFF on the remote control repeatedly. The menu icons are displayed. 2 2 Press j or l to select the "Audio track" icon. 06:30 STEREO Press j or l to select the "Audio track" icon. 0:06:30 1 KARAOKE Q EN ­ ­ OFF When using the AUDIO SELECT button Press AUDIO SELECT on the remote control when playing or while the resume function is active. Then go to step 3. 3 Press i or k to select the audio track. Then press ENTER. The audio track will change each time you press i or k. Example: A disc has 2 audio tracks (track 1 and track 2), and track 1 has 2 vocal channels. 1 KARAOKE Q EN VOCAL 1 OFF 3 Press i or k to select the audio track. The audio track will change each time you press i or k. 00:06:30 06:30 LEFT 00:06:30 1 KARAOKE Q EN VOCAL 2 OFF 00:06:30 06:30 RIGHT 1 KARAOKE Q EN VOCAL 1+2 OFF 00:06:30 1 KARAOKE Q EN ­ ­ OFF 06:30 STEREO Video CD karaoke discs typically have the vocals recorded on the right channel. Select "LEFT" to play back music without vocals. [. . . ] "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. · Manufactured under license from Digital Theater Systems, Inc. 5, 451, 942 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc. [. . . ]