User manual SONY XDR-C705DAB

[. . . ] If you do not operate within 7 seconds while setting the clock, the clock setting mode will be cancelled. Setup time for this operation is adjusted automatically when the customer operates the set while receiving DAB service. You can choose the clock display 12-hour system (default) and 24-hour system. The clock display changes by turns (12-hour system: "AM 12:00" = midnight, 24-hour system: "0:00" = midnight. [. . . ] TUNE/SELECT to select the favourite number to preset, then press and hold PRESET. "saved" appears for 7 seconds in the display and the service or station is stored. (DAB services are stored with a service label. ) Notes · To preset another service or station, repeat these steps. When the service or station is not registered, "Empty preset" appears in the display. If you do not operate within 7 seconds during the above steps, the current mode will be cancelled. Each time you press SLEEP, the duration changes as follows: The unit will automatically scan and create a list of receivable DAB broadcasts. The unit automatically turns off when the duration time is passed. Press ENTER or 7 seconds after you have finished setting the duration setting and released SLEEP, "activated" appears in the display and then the sleep timer starts. The unit will play for the duration you set, and then shut off. When the clock will not be set in 3 minutes, "AM 12:03 clock not set. If no broadcasts are found by the DAB scan, "Station not available" appears in the display. When the service or station is not registered, "Empty preset" appears in the display. If you do not operate within 7 seconds during the above steps, the current mode will be cancelled. Repeat step 2 to select the desired sleep timer setting even after the sleep timer has been activated. Press SNOOZE/SLEEP OFF, the unit will turn off. Press SLEEP to set the sleep timer "OFF, " only the sleep timer will be cancelled (the radio keeps ON). The selected display mode remains even if you turn the unit off and on again, or change the band. the display can be up to 16 characters long. Each time you press DISPLAY· BRIGHTNESS, the bottom in a display changes as follows: Dynamic PTY When the radio fails to function properly, follow as: Operate the unit only on the power sources specified in "Specifications". The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. Use the unit within a temperature range of 0°C to 40°C (32°F to 104°F). [. . . ] Please note down of your settings in case you want to preset them again. DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. When DAB broadcasts in dynamic range compression, you can adjust the dynamic range by this unit. When you adjusted the DRC level, volume can be heard more loudly. [. . . ]