User manual SONY XEC-1000

[. . . ] As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] You can preset up to 30 radio stations: 20 for FM and 10 for AM in any order. 1 Press RADIO FM/AM to select the band (direct power-on). 1 Press RADIO FM/AM (direct poweron). 2 Press PRESET + () or – () repeatedly until the desired preset number appears. 2 3 Press RADIO FM/AM to select the band. Press MENU. Display window 24GB Basic Operations 4 Press  repeatedly until you find “RADIO”, then press ENTER. 4 Press  repeatedly until you want to 5 Press  repeatedly until you find “Delete”, then press ENTER. “Preset deleted” is displayed. delete, then press ENTER. Basic Operations 5 Press  repeatedly until you find “Auto preset”, then press ENTER. The stations are stored in memory from the lower frequencies to the higher ones. If a station cannot be preset automatically You need to preset a station with a weak signal manually. 2 Press RADIO FM/AM to select the band. 5 Press  repeatedly until you find “RADIO”, then press ENTER. 6 Press  repeatedly until you find “Preset Memory”, then press ENTER. 7 Press  repeatedly until the station you want to preset appears, then press ENTER. 8 Press  repeatedly until you find “Preset Station”, then press ENTER. “Preset Completed” is displayed. Tip The preset radio stations remain in memory even if you unplug the AC power cord. To delete a preset 1 Press MENU. The unit starts playing. To Pull out the USB device Press Pull the USB device out from USB port. Notes  Do not remove the USB device while “Loading” is displaying.  If the unit does not recognize the USB device, remove the USB device and insert it again.  Do not insert anything other than the USB device (such as liquid, metal, combustible material, etc. ) into the USB port. It may cause a fire, an electric shock, and a malfunction. Display window To change the play mode Confirm “Changing the play mode”. (page 18) SD card and USB device of play mode as follows: To listen to the folder Press MODE repeatedly until the desired repeat play mode appears. Each press changes the play mode as follows: To Stop playback Press  (Stop).  (Stop) of the USB device. The screen will display “”. Press  (Play/Pause) to All files in selected folder are played back from first to last. (“ ”) Files are played back in random order (“SHUF”) Files in selected folder are played in random order. (“SHUF ”) Selected songs are played in the desired order (“PGM”*1) Normal play (None) Resume playback from the point you stopped Pause playback Go to the next MP3/WMA/ AAC file resume playback from the point you stopped.  (Play/Pause). previous MP3/ WMA/AAC file Select a folder Reinforce the bass sound /TUNE + or –. [. . . ] Cause and remedy  Find a location and an orientation that provide good reception.  The AM antenna switch is set to “EXT”.  Set the AM antenna switch to “INT” when the loop antenna is not connected.  As radio waves are weaker in buildings, listen to the unit as near to a window as possible. [. . . ]