User manual SONY XPV713

[. . . ] During operation on AC house current, all of the battery indicators turn off. Battery replacement The battery indicator in the display changes first from to , then to according to the remaining power of the batteries. If the unit remains in use after lights, "Lo-bAtt" appears and operation stops. Turning the power on E Press ePLAY/PAUSE. Power is turned on and playback starts. Note "Err" appears on the display in the following cases: ­When you try to play the unit without a disc in the disc compartment. ­When you play a disc placed upside-down or a defective disc. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] An amplified speaker system can be connected instead to enjoy the CD sound. CAUTION Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user's right or authority to operate this product. This Class B digital apparatus complies with Canadian ICES-003. Volume Press VOLUME+ or - to adjust the volume level. C2 3 DSL Hold down PHRASE/DSL for more powerful sound and deeper bass. Hold down PHRASE/DSL again to return to normal playback. PRECAUTIONS To maintain good performance · Do not use the unit in places which are extremely hot, cold, dusty or humid. In particular, do not use or keep the unit in following places. · in a high humidity area such as a bathroom · near a heater · in an area exposed to direct sunlight (e. g. , inside a parked car, where it can become extremely hot) · near sources of strong magnetism, such as televisions, speakers, or magnets · where there is a lot of movement or vibration, such as on a car dashboard or an unstable shelf · Do not open the battery compartment with wet hands. · Wipe the unit thoroughly before inserting batteries and after use. · Before connecting the AC adaptor or the headphones etc. , be sure to confirm the power is off. E USING ON RECHARGEABLE BATTERIES C · Be sure to use size AA Ni-Cd 1. 2 V 700 mAh rechargeable batteries, which are commercially available. · Be sure to read the instructions of the purchased rechargeable batteries before use. · When using on rechargeable batteries for the first time, charge them until the battery indicator goes out. · Before charging the batteries, close the disc compartment. You cannot charge the batteries while it is open. 1 : one-track repeat 2 : all-track repeat 3 RNDM/ : random repeat 4 RNDM: random 5 normal playback Note You cannot go back to the previous track by pressing r during random play. Phrase repeat play H Press PHRASE/DSL during playback. With each press, playback returns to 5 seconds before. Note You cannot return to the previous track by pressing PHRASE/DSL. OTHER FUNCTIONS J You can set on or off timers, Jog beat, or E·A·S·S (Electronic Anti-Shock System. ) Press MENU repeatedly to select the desired mode. With each press, the display changes as follows. 1 5OFF (Timer-off) 2 5ON (Timer-on) 3 bEAt (Jog beat) 4 E·A·S·S (Electronic Anti-Shock System) For details of each operation, refer to the following. CONNECTING TO AN EXTERNAL UNIT To PHONES/LINE OUT jack K Use a commercially available connection cord which has a ø3. 5 mm stereo miniplug at one end and two phono plugs at the other end. Connect the stereo mini-plug to the PHONES/LINE OUT jack of the unit and connect the phono plugs to the analog input terminals of the external unit, such as the amplifier or the equipment with a built-in amplifier. The CD sound can be heard through the connected audio system. I H Note Timer-off and Timer-on settings are canceled, if the unit is turned off/on after setting is completed or when recharging the batteries. Note · Turn off the power of both units before connection. · DO NOT connect to the PHONO inputs of an amplifier (with a built-in phonoequalizeramplifier). · Adjust the volume and DSL on this unit. 5OFF (Timer-off) Timer-off function turns off the unit after a specified time. 1 Press r or t to set the hour and then press DISPLAY/ENTER. 2 Press r or t to set the minute and then press DISPLAY/ENTER. When timer-off is set, all-track repeat is selected automatically and Auto power off function is disabled. [. . . ] 1 Press r or t to set the hour and then press DISPLAY/ENTER. 2 Press r or t to set the minute and then press DISPLAY/ENTER. The setting is completed and the power is turned off automatically. Adjustable range: up to 12 hours 59 minutes Note Take care not to get too much solution on the swab, which could flow into the unit and cause damage. [. . . ]