User manual SONY XR-1300R

[. . . ] Thank you for purchasing this Sony Cassette Player. If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. [. . . ] When a number is indicated in the display, the unit starts storing stations from the one currently displayed. You can preset up to 18 FM stations (6 each for FM1, 2, and 3), up to 6 MW stations, and up to 6 LW stations in the order of your choice. Press either side of (SEEK) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK) repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (MENU), then press either side of (PRST) repeatedly until "LOCAL" (local seek mode) is displayed. Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, press and hold either side of (SEEK) until the desired frequency appears (manual tuning). Press either side of (SEEK) to tune in the station that you want to store on the number button. Press and hold the desired number button ((1) to (6)) until "MEM" appears. Note If you try to store another station on the same number button, the previously stored station will be erased. During radio reception, press (MENU), then press either side of (PRST) repeatedly until "MONO" appears. Press the number button ((1) to (6)) on which the desired station is stored. To return to normal mode, select "MONOOFF" in step 2 above. Tip Press either side of (PRST) to receive the stations in the order they are stored in the memory (Preset Search Function). Your car stereo offers you a variety of services. Here are just a few: retuning the same programme automatically, listening to traffic announcements, and locating a station by programme type. notes · Depending on the country or region, not all of the RDS functions are available. RDS may not work properly if the signal strength is weak or if the station you are tuned to is not transmitting RDS data. By using this function, you can continuously listen to the same programme during a longdistance drive without having to retune the station manually. The unit starts searching for an alternative station with a stronger signal in the same network. Note When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF) repeatedly until "AF-OFF" appears. [. . . ] When you preset RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations. To cancel all traffic announcements, turn off the function by pressing (TA) until "TA-OFF" appears. Press (MENU), then press either side of (PRST) repeatedly until "BTM" appears. [. . . ]