User manual SONY XR-1853MK2

[. . . ] â· Automatic Memory function stores a total of 24 stations in memory quickly and easily (page 6). â· Memory Scan function scans each preset station for five seconds in order (page 7). Do not touch the tape surface of a cassette, as any dirt or dust will contaminate the heads. [. . . ] Press either side of the button repeatedly until the desired station is received. When an FM stereo program with a sufficient signal strength is tuned in, FM 12 3 ST the "ST" indication will appear. The stations with the strongest signals will be scanned for five seconds each in order. This function selects from the currently received band six stations and memorizes them in order of their frequencies. If six strong stations cannot be found, it will search the band again looking for farther stations. Tune in the station which you wish to store on the preset number button. Keep the desired preset number button ( 1 to 6 ) pressed for about two seconds until the volume briefly mutes. The number of the pressed preset number button now appears on the display window. Up to 6 stations on each band (FM1, FM2, MW and LW) can be stored on the preset number buttons in order of your choice. Therefore, 12 stations can be memorized on FM. If you try to store another station on the same preset number button, the previously stored station will be erased. Use any tuning method to tune to a frequency slightly below that of the first station you want to memorize. Note If a station you want to store has a weak signal or interference, it might not automatically be memorized. Press momentarily the preset number button on which the desired station is stored. [. . . ] 4 TONE control Turn the knob to the left for less treble. Tape track Wow and flutter Frequency response Signal-to- noise ratio 4-track 2-channel stereo 0. Output lead Tone controls Power requirements Dimensions Power antenna relay control lead 12 dB at 10 kHz 12 V DC car battery (negative ground) Approx. [. . . ]