User manual SONY XR-2753

[. . . ] *1 You can connect a CD changer, an MD changer, a CD player, or an MD player. Voice guide for safe driving (XR-2753 only) This unit has a voice guide function*. When the voice guide function is on, the unit gives vocalized comments on functions corresponding to the relevant button pushed. These comments can be vocalized in either English or Spanish. [. . . ] When there are recorded traffic announcements you have not listened to yet, t flashes. To listen to the previous ones, press (TIR) or push the SEEK/AMS control up. The unit turns on automatically and stands by for traffic announcements for four hours (two hours before and after the preset time). If the preset station does not broadcast the traffic announcement while searching, the unit starts searching for other traffic programme (TP) stations. * If the corresponding optional equipment is not connected, this item will not appear. Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander. You can adjust the equalizer curve, listening position, cut-off frequency, bass, treble, balance, and fader. You can store the bass and treble levels independently for each source. *1 XR-2753 only *2 If the corresponding optional equipment is not connected, this item will not appear. If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Adjust within three seconds after selecting the item. This lets you add some effects to the sound field of the currently selected source. for details , refer to the instructions manual supplied with the equalizer preamplifier. Note If you connect the optional digital preamplifier XDP-210EQ, the voice guide function will not work. This unit can control a maximum of ten external CD/MD units in this configuration: CD unit ­ maximum of five MD unit ­ maximum of five Any combination up to ten will work. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. Press (MODE) until the desired unit appears. You can labell CD and CD TEXT discs with a personalized name using the disc memo function, refer to "Labelling a CD" (page 27). However, if you use personalized labells, they will always take priority over the original CD TEXT information when such information is displayed. [. . . ] Never touch the connectors directly with your fingers or any metal device. Use a thin screwdriver to push in the clip on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting. Line outputs (2) Subwoofer output (XR-2753 only) (1) Power aerial relay control lead Power amplifier control lead Telephone ATT control lead Illumination control lead Tone controls Bass ±8 dB at 100 Hz Treble ±8 dB at 10 kHz Power requirements 12 V DC car battery (negative ground) Dimensions Approx. 5 kg Supplied accessories Rotary commander (1) Parts for installation and connections (1 set) Front panel case (1) Optional accessories Wireless remote RM-X47 BUS cable (supplied with an RCA pin cord) RC-61 (1 m), RC-62 (2 m) Optional equipment CD changer (10 discs) CDX-828, CDX-727 MD changer (6 discs) MDX-65 Other CD/MD changers with the Sony-BUS system Source selector XA-C30 XR-2753: Digital equalizer preamplifier XDP-210EQ Outputs Design and specifications are subject to change without notice. [. . . ]