User manual SONY XR-5810R

[. . . ] Remove the front panel and press the reset button with a pointed object, such as a ballpoint pen. Attach part a of the front panel to part b of the unit as illustrated and push the left side into position until it clicks. You can detach the front panel of this unit to protect the unit from being stolen. Be sure not to attach the front panel upside down. [. . . ] In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. Note The "*" indication means that an RDS station is being received. Each time you press (DSPL), the item changes as follows: By using this function, you can continuously listen to the same programme during a longdistance drive without having to retune the station manually. After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. (See "Changing the sound and display settings" on page 17). Note "NO NAME" appears if the received station does not transmit RDS data (XR-5890R/5880R only). The unit starts searching for an alternative station with a stronger signal in the same network. Note When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (AF/TA) repeatedly until "AF TA-OFF" appears. Then, the unit starts searching for a station that broadcasts it. When "EON" appears with "TP" in the display, the current station makes use of broadcast traffic announcements by other stations in the same network. You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. If an emergency announcement comes in while you are listening to the radio, the programme will automatically switch to it. If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to on. The unit will then automatically switch to these announcements no matter which source you are listening to at the time. When you preset RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations. To cancel all traffic announcements, turn off the function by pressing (AF/TA) until "AF TA-OFF" appears. Press (AF/TA) repeatedly to select either "AF-ON, " "TA-ON" or "AF TA-ON" (for both AF and TA functions). [. . . ] You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control. [. . . ]