User manual SONY XR-6600RDS

[. . . ] Detachable-front panel enables you to take the front panel away with you when you leave your car (page 4). Caution alarm will be activated if you turn off the ignition key without removing the front panel from the unit. Output: 25 W × 4 ch) enables you to enjoy a 4speaker system. Up to 30 stations can be preset: 18 stations on FM and 6 stations each on MW and LW. [. . . ] To avoid the automatic tuning from stopping on stations too frequently (local seek mode), press the SENS button momentarily to get the "LCL" indication. Only the stations with relatively strong signals can be tuned in. Each time you press the D button, the displayed items alternate the between frequency and time. The sound will improve, but it will become monaural. Press the B button for more than two seconds. When there is no preset number indicated on the display window, stations will be stored on all preset number buttons on the currently selected band. When there is a preset number indicated on the display window, the unit will store stations on all preset number buttons from the one currently displayed. For example, when you select FM2 and preset number 3 is displayed, the operation will start from preset number 3 on FM2, and will stop at preset number 6 on FM3. Press either side of the PRESET button momentarily to receive in order the stations stored in the memory (Preset Search Function). Tune in the station which you wish to store on the preset number button. Keep the desired preset number button BL. ( 1 INTRO to 6 SKIP ) pressed for about two seconds until you hear a beep tone. The number of the pressed preset number button appears on the display window. Up to 6 stations on each band (FM1, FM2, FM3, MW and LW) can be stored on the preset number buttons in order of your choice. Therefore, 18 stations can be memorized on FM. If you try to store another station on the same preset number button, the previously stored station will be erased. Note If you press the preset number button for more than two seconds, the currently received station will be memorized again. To receive the previously memorized station, make sure that the preset number button is pressed only momentarily. Your car stereo offers you a variety of services. Depending on the country or region, not all of the RDS functions are available. RDS may not work properly if the signal strength is weak or if the station you are tuned in is not transmitting RDS data. By using this function, you can continuously listen to the same programme during a longdistance drive without having to re-tune the station manually. [. . . ] If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to on. The unit will then automatically switch to these announcement no matter what you are listening to at the time. When you preset the RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you turn in the preset station. You can select different setting (AF, TA, or both) for individual preset station or the same setting for all preset stations. [. . . ]