User manual SONY XR-6690RDS

[. . . ] If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. If no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. If no sound comes from the speakers of a two-speaker system, set the fader control to the centre position. [. . . ] Local Seek Mode: If the automatic tuning stops too frequently, press (SENS) repeatedly until "LOCAL-ON" appears. Press either side of (SEEK/AMS) to tune in the station that you want to store on the number button. Press the desired number button ((1) to (6)) until "MEM" appears. Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, press either side of (SEEK/AMS) until the desired frequency appears (manual tuning). Note If you try to store another station on the same number button, the previously stored station will be erased. During radio reception, press (SENS) repeatedly until "MONO-ON" appears. Press the number button ((1) to (6)) on which the desired station is stored. Your car stereo offers you a variety of services. Here are just a few: retuning the same programme automatically, listening to traffic announcements, and locating a station by programme type. notes · Depending on the country or region, not all of the RDS functions are available. "TP" appears in the display when the unit finds a station broadcasting traffic announcements. When the traffic announcement starts, "TA" flashes. the flashing stops when the traffic announcement is over. Tip If the traffic announcement starts while you are listening to another programme source, the unit automatically switches to the announcement and goes back to the original source when the announcement is over. notes · "NO TP" flashes for five seconds if the received station does not broadcast traffic announcements. Then, the unit starts searching for a station that broadcasts it. When "EON" appears with "TP" in the display, the current station makes use of broadcast traffic announcements by other stations in the same network. You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. If an emergency announcement comes in while you are listening to the radio, the programme will automatically switch to it. If you are listening to a source other than the radio, the emergency announcements will be heard if you set AF or TA to on. [. . . ] Playing tracks in random order -- Shuffle Play SHUF-2 ­ to play the tracks in the current unit in random order. During playback, press (4) (SHUF) repeatedly until the desired setting appears. * "SHUF-ALL" is only available when you connect two or more optinal CD/MD units. When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. [. . . ]