User manual SONY XR-C2604J

[. . . ] If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the car audio. Sugary residues on this unit or cassette tapes may contaminate the playback heads, reduce the sound quality, or prevent sound reproduction altogether. Cassette cleaning kits cannot remove sugar from the tape heads. [. . . ] Tip The Motion Display mode can be turned off. When fast-forwarding or rewinding with the m or M button, the tuner will turn on automatically. Each time you press (SOURCE), the source changes as follows: * If the corresponding optional equipment is not connected, this item will not appear. Each time you press (MODE), the band changes as follows: Press either side of (PRST/DISC) repeatedly until "ATA" appears. Press (MENU), then press either side of (PRST/DISC) repeatedly until "BTM" appears. The unit stores stations in the order of their frequencies on the number buttons. To return to normal playback mode, select "OFF" in step 3 above. The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting. â· When a number is already indicated in the display, the unit stores stations in order from the one currently displayed. You can preset up to 18 FM stations (6 each for FM1, 2, and 3), up to 6 MW stations, and up to 12 SW stations (6 each for SW1 and 2) in the order of your choice. Press either side of (SEEK/AMS) to search for the station (automatic tuning). Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received. Note If the automatic tuning stops too frequently, press (MENU), then press either side of (PRST/DISC) repeatedly until "LOCAL" (local seek mode) is displayed. Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, Press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning). Press either side of (SEEK/AMS) to tune in the station that you want to store on the number button. Press and hold the desired number button ((1) to (6)) until "MEM" appears. Note If you store a new station on a number button which already has a station registered, the previously stored station will be replaced by the new station. During radio reception, press (MENU), then press either side of (PRST/DISC) repeatedly until "MONO" appears. Press either side of (SEEK/AMS) repeatedly until "MONO-ON" appears. [. . . ] When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. if the fuse blows , check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. To return to normal playback mode, select "REP-OFF" in step above. [. . . ]