User manual SONY XR-C550

[. . . ] The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] You can search for the memorized stations names in the display. Note Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. -- Select "Auto" to dim the display only when you turn the lights on. Contrast to adjust the contrast if the indications in the display are not recognizable because of the unit's installed position. ⷠBeep to turn on or off the beeps. -- Select "norm" to use the rotary remote in the factory preset position. Loud (Loudness) to enjoy bass and treble even at low volume. Each time you press (DSPL) during CD/MD playback, the item changes as follows: $ Elapsed playback time $ Disc name*1 $ Track name*2 $ Clock *1 If you have not labeled the CD, "NO Name" appears in the display. 2 * If the track name of an MD is not prerecorded, "NO T. Tip If the name of the MD is too long, you can scroll it across the display by pressing (SHIFT), then (1) (N). Each time you press (2) (SET UP), the item changes as follows: The disc name appears when the disc has changed (if the disc name is selected). ⷠThe track name appears when the track has changed (if the track name is selected). ⷠThe disc or track name appears depending on the setting when you press (SOURCE) to select an MD. For the "Contrast" setting, pressing (4) (n) makes the contrast higher, and pressing (1) (N) makes the contrast lower. When the mode setting is complete, the normal playback mode appears. If you press (DSPL) to change the display item, the disc or track name of the MD is scrolled automatically whether you set the function on or off. Press (SHIFT), then press (2) (SET UP) repeatedly until "A. ⷠRepeat 2 to repeat a disc. ⷠRepeat 3 to repeat all the discs in the current changer when you connect two or more changers. Press (DSPL) for two seconds during MD playback. The recording date of the track is displayed for about three seconds. During playback, press either side of (SEEK/AMS) once for each track you wish to skip. [. . . ] 1 SEEK/AMS (seek/Automatic Music Sensor/manual search) button 5, 6, 7, 8, 11, 13 2 MODE (band select, changer select, tape transport direction) button 5, 7, 8, 10, 12 3 SOURCE (source select) button 5, 7, 8, 10, 12 4 SOUND button 9 5 Display window 6 6 (eject) button (located on the front of the unit hidden by the front panel) 5 7 DSPL button (display mode change) button 6, 8, 9, 10, 11, 12, 13 8 OPEN button 4, 5, 15 9 LIST button Disc Memo 12 List-up 8, 13 Station Memo 8 !¡ Reset button (located on the front of the unit hidden by the front panel) 4 !Buttons with the same functions as those on this unit. 1 OFF button 2 MODE button 3 SOURCE button 4 SEEK/AMS button You cannot do manual search and manual tuning with the remote commander. [. . . ]