User manual SONY XR-C6100W

[. . . ] This unit lets you enjoy a variety of features by using an optional rotary commander and supplied wireless remote commander. In addition to the tape playback and the radio operation you can expand your system by connecting optional CD/MD unit*. * You can connect to an CD changer, MD changer, or an CD player, MD player. Playing tracks repeatedly -- Repeat play . [. . . ] The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even if the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control. This effect is similar to the one you get when you use an optional subwoofer system. Moreover, the Digital D-bass* function creates even sharper and more powerful bass sounds than Analog D-bass. Adjust within three seconds after selecting. (After three seconds the button will again serve as volume control button. Tip The unit decreases the volume automatically when a telephone call comes in (Telephone-ATT function). To obtain the beep tone again, press these buttons again. Note If you connect an optional power amplifier to rhe LINE OUT and do not use the built-in amplifier, the beep tone will be disabled. You can choose the color between amber and green. This unit can control a maximum of seven external CD/MD units in this configuretion: CD unit - maximum of five MD unit - maximum of five. During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired part. Press (SOURCE) until the desired unit indication appears on the display. When a CD/MD unit is connected, all the tracks play from the beginning. During playback, press either side of (PRESET/DISC) . To return to the previous disc To advance to the next disc Selecting CD/MD units (when several CD/MD units are connected) The first 10 seconds of all the tracks on the current disc are played in order. After the first disc is over, the next disc is played. When you find the desired track, press again . Each time you press (DSPL) during CD/MD playback, the item changes as follows: $ Elapsed playback time $ Disc name*1 $ Track name*2 $ Clock *1 If there is no prerecorded name for a CD or MD , "NO NAME" appears in the display. *2 If the track name of an MD is not prerecorded "NO NAME" appears in the display. [. . . ] During CD/MD playback: Selects CD/MD units when several CD/MD units are connected. During radio reception: Changes preset groupes within band received. Each time the button is pressed, the program source mode changes as follows: The unit cannot be operated with the wireless remote commander unless the SOURCE button on the unit is pressed or a cassette is inserted to activate the unit first. Outputs Power antenna control lead Power amplifier control lead LINE OUT Rear (1) Front (1) Bass ±8 dB at 100 Hz Treble ±8 dB at 10 kHz 12 V DC car battery (negative ground) Approx. [. . . ]