User manual SONY XR-C7220

[. . . ] 3-865-683-11(1) FM/AM Cassette Car Stereo Operating Instructions US Owner's Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. XR-C7220 Serial No. For installation and connections, see the supplied installation/connections manual. XR-C7220 © 1999 by Sony Corporation Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] ·A. SCRL (Auto Scroll)* (page 16). Boosting the bass sound -- D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control. Level D-BASS 3 D-BASS 2 D-BASS 1 1 2 Press (SHIFT). Press (2) (SET UP) repeatedly until the desired item appears. Each time you press (2) (SET UP), the item changes as follows: CLOCK n BEEP n RM n M. DSPL n A. SCRL* * When no CD or MD is playing, this item will not appear. 0dB Frequency (Hz) Adjusting the bass curve Turn the D-BASS control to adjust the bass level (1, 2, or 3). "D-BASS" appears in the display. To cancel, turn the control to OFF. Note If the bass sound becomes distorted, adjust the D-BASS control or volume. 3 4 Press (4) (n) to select the desired setting (Example: ON or OFF). After the mode setting is complete, the display returns to normal playback mode. Note If the "SFT" indication appears, press (SHIFT) to complete the mode setting. 15 With Optional Equipment CD/MD Unit This unit can control a maximum of ten external CD/MD units in this configuration: CD unit ­ maximum of five MD unit ­ maximum of five Any combination up to ten will work. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. (See "Changing the sound and display settings" on page 15). Playing a CD or MD 1 2 Press (SOURCE) repeatedly to select CD or MD. Press (MODE) until the desired unit appears. CD/MD playback starts. You can label CD and CD TEXT discs with a personalized name using the disc memo function. Refer to "Labeling a CD" (page 18). However, if you use personalized labels, they will always take priority over the original CD TEXT information when such information is displayed. Automatically scrolling a disc name -- Auto Scroll If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows: · The disc name appears when the disc has changed (if the disc name is selected). · The track name appears when the track has changed (if the track name is selected). When a CD/MD unit is connected, all the tracks play from the beginning. Changing the display item Each time you press (DSPL) during CD, CD TEXT, or MD playback, the item changes as follows: $ Elapsed playback time $ Disc name*1/Artist name*2 $ Track name*3 $ Clock If you press (DSPL) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off. 1 2 3 4 During playback, press (SHIFT). Press (2) (SET UP) repeatedly until "A. SCRL" appears. Press (4) (n) to select "A. SCRL-ON. " Press (SHIFT). * If you have not labeled the disc or if there is no disc name prerecorded on the MD, "NO NAME" appears in the display. 2 * If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name. ) 3 * If the track name of a CD TEXT disc or MD is not prerecorded, "NO NAME" appears in the display. 1 To cancel Auto Scroll, select "A. SCRL-OFF" in step 3 above. Note For some discs with very many characters, the following cases may happen: -- Some of the characters are not displayed. Tip To manually scroll the long name of an MD or CD TEXT disc after activating the Auto Scroll function, press (SHIFT), then (1) (N) (manual scroll). 16 Locating a specific track -- Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down and release for each track you want to skip. To locate succeeding tracks To locate preceding tracks SEEK / AMS Playing tracks repeatedly -- Repeat Play You can select: · REP-1 ­ to repeat a track. [. . . ] · There is noise in the space between tracks. · The blank space is too short (less than four seconds). · The SEEK/AMS control was pushed up immediately before the following track. · The SEEK/AMS control was pushed down immediately after the track starts. [. . . ]