User manual SONY XR-C7300

[. . . ] Thank you for purchasing this Sony Cassette Player. This unit lets you enjoy a variety of features as well as a supplied rotary commander or an optional wireless remote. In addition to the cassette playback and radio operations, you can expand your system by connecting an optional CD/MD unit*1. When you operate this unit or a connected optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc*2. [. . . ] Pressing (MODE) changes the operation in the following ways; * If the corresponding optional equipment is not connected, this item will not appear. Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander. You can store the bass and treble levels independently for each source. Adjust within three seconds after selecting the item. If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Press (SOUND) for two seconds while pushing the VOL control. Tip You can also change the operative direction of these controls with the unit (page 14). Tip The unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). The following items can be set: · BEEP ­ to turn the beep sound on or off. -- Select "NORM" to use the rotary commander in the factory-set position. -- Select "REV" when you mount the rotary commander on the right hand side of the steering column. You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS control. Each time you press (2) (SET UP), the item changes as follows: SCRL* * When no CD or MD is playing, this item will not appear. After the mode setting is complete, the display returns to normal playback mode. This unit can control a maximum of ten external CD/MD units in this configuration: CD unit ­ maximum of five MD unit ­ maximum of five Any combination up to ten will work. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. [. . . ] ⷠNever touch the connectors directly with your fingers or with any metal device. Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Outputs Audio outputs (2) Power aerial relay control lead Power amplifier control lead Telephone ATT control lead Bass ±8 dB at 100 Hz Treble ±8 dB at 10 kHz 12 V DC car battery (negative earth) Approx. 2 kg Rotary commander (1) Parts for installation and connections (1 set) Front panel case (1) Wireless remote RM-X47 BUS cable (supplied with an RCA pin cord) RC-61 (1 m), RC-62 (2 m) CD changer (10 discs) CDX-828, CDX-727, CDX-626 MD changer (6 discs) MDX-65 Other CD/MD changers with the Sony-BUS system Source selector XA-C30 Design and specifications are subject to change without notice. [. . . ]