User manual SONY XR-C900RDS

[. . . ] This unit lets you enjoy a variety of features by using either a rotary remote or a wireless remote. In addition to the tape playback and the radio operations, you can expand your system by connecting an optional CD/MD changer and digital preamplifier. 25 Listening to each programme source in its registered surround menu -- Source Sound Memory (SSM) . Before operating the unit for the first time or after replacing the car battery, you must reset the unit. [. . . ] The recording date of the track is displayed for about three seconds. ⷠRepeat 2 to repeat a disc. ⷠRepeat 3 to repeat all the discs in the current changer when you connected two changers or more. During playback, press either side of (SEEK/AMS) once for each track you want to skip. During playback, press (SHIFT), then press (3) (P. During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point. To search forward To search backward To go back to the normal playback mode, select "Repeat off" in step 2 above. Press the number button that corresponds with the desired disc number. Playing tracks in random order -- Shuffle Play Shuf 3 to play all the tracks in a random order when you connected two changers or more. You can play the first 10 seconds of all the tracks on the currently selected disc. During playback, press (SHIFT), then press (3) (P. During playback, press (SHIFT), then press (3) (P. To go back to the normal playback mode, select "Intro off" in step 2 above. To go back to the normal playback mode, select "Shuf off" in step 2 above. -- Programme Memory (CD/MD changer with programme memory function) You can play the tracks in the order you want by making your own programme. You can make two programmes: Programme 1 and Programme 2. You can select up to 12 tracks in each programme. "*Wait*" appears in the display while the unit is reading the data, or when a disc has not been put into the unit. ⷠ"*Mem full*" appears in the display when you try to enter more than 12 tracks into a programme at one time. Changing the disc order in the changer will not affect program memory play. 2 Press (SHIFT), then press the number button to select the disc. [. . . ] 6 MUTE button 7 (­) (+) buttons 8 DSPL button 9 SOUND button When the POWER SELECT switch is set to the B position, the unit cannot be operated with the wireless remote unless (SOURCE) on the unit is pressed or a cassette is inserted to activate the unit first. Outputs Line outputs (3) Power aerial relay control lead Power amplifier control lead Bass ±8 dB at 100 Hz Treble ±8 dB at 10 kHz 12 V DC car battery (negative ground) Approx. Line outs Line out impedance Bus input impedance Distortion Line out level FRONT/REAR 200 ohm 50 kohm 0. Design and specifications are subject to change without notice. [. . . ]