User manual SONY XR-CA420

[. . . ] If you have any questions or problems concerning your unit that are not covered in this manual, please consult your nearest Sony dealer. If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the car audio. Sugary residues on this unit or cassette tapes may contaminate the playback heads, reduce the sound quality, or prevent sound reproduction altogether. Cassette cleaning kits cannot remove sugar from the tape heads. [. . . ] The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 6 stations on each band (XR-CA420X: FM1, FM2, FM3, AM1, and AM2) (XR-CA420: FM1, FM2, FM3, MW, SW1, and SW2). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. You can preset up to 18 FM stations (6 each for FM1, 2, and 3) and up to 12 AM stations (6 each for AM1 and 2) in the order of your choice. You can preset up to 18 FM stations (6 each for FM1, 2, and 3), up to 6 MW stations, and up to 12 SW stations (6 each for SW1 and 2) in the order of your choice. Press either side of (SEEK/AMS) to tune in the station that you want to store on the number button. Press the desired number button ((1) to (6)) until "MEM" appears. Each time you press (SRC), the source changes as follows: *1 If the corresponding optional equipment is not connected, this item will not appear . *2 If a tape is not inserted, this item will not appear. Each time you press (MODE), the band changes as follows: Note If you try to store another station on the same number button, the previously stored station will be erased. Press the number button ((1) to (6)) on which the desired station is stored. The unit stores stations in the order of their frequencies on the number buttons. The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting. ⷠWhen a number is indicated in the display, the unit starts storing stations from the one currently displayed. Automatic tuning: Press either side of (SEEK/AMS) to search for the station. Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received. Local Seek Mode: If the automatic tuning stops too frequently, press (SENS) repeatedly until "LOCAL-ON" appears. You can store the bass and treble levels independently for each source. Each time you press (SEL), the item changes as follows: Only the stations with relatively strong signals will be tuned in. Tip If you know the frequency of the station you want to listen to, press either side of (SEEK/AMS) until the desired frequency appears (manual tuning). [. . . ] if the fuse blows , check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. Playing tracks in random order -- Shuffle Play SHUF-2 ­ to play the tracks in the current unit in random order. During playback, press(4) (SHUF) repeatedly until the desired setting appears. [. . . ]