User manual SONY XR-CA800

[. . . ] Thank you for purchasing this Sony Cassette Player. You can enjoy its various features even more with: · CD TEXT information (displayed when a CD TEXT disc*2 is played on a connected optional CD unit with the CD TEXT function). ⷠSupplied controller accessories Rotary commander RM-X5S Card remote commander RM-X116 · optional controller accessory Rotary commander RM-X4S *1 This unit works with Sony products only. Playing tracks in random order -- Shuffle Play. [. . . ] You can tune in a station by selecting the type of programme you would like to listen to. Press (MENU), then press either side of (DISC) repeatedly until "BTM" appears. Presetting different settings for each preset station " Press the desired number button ((1) to (6)) until "MEM" appears. Repeat from step 1 to preset other stations. Note You cannot use this function in some countries where no PTY (Programme Type selection) data is available. Press (DSPL/PTY) during FM reception until "PTY" appears. "- - - - - - - -" appears if the received station is not an RDS station, or if the RDS data is not received. During radio reception, press (MENU), then press either side of (DISC) repeatedly until "CT-OFF" appears. The CT function may not work even though an RDS station is being received. ⷠThere might be a difference between the time set by the CT function and the actual time. You can also control the unit (and optional CD/ MD units) with a rotary commander. Using the rotary commander First, attach the appropriate label depending on how you want to mount the rotary commander. Change source (radio/CD*1/MD*1/Tape) Change operation (radio band/CD unit*1/MD unit*1/tape playback direction) Attenuate sound Stop playback or radio reception Adjust the sound menu Change the display item *2 If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for 2 seconds to turn off the clock indication after turning off the ignition. To turn the unit on, press the power on/off button on the unit. If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. The bass and treble levels can be stored independently for each source. The following items can be set: Each time you press (SOUND), the item changes as follows: ­ When Auto scroll is set to off and the disc/ track name is changed, the disc/track name does not scroll. * When no CD or MD is playing, this item will not appear. When adjusting with the rotary commander, press (SOUND) and rotate the VOL control. Note Adjust within 3 seconds after selecting the item. Quickly attenuating the sound (With the rotary commander or the card remote commander) Press (ATT) on the rotary commander or card remote commander. When the disc/track changes, any prerecorded title*1 of the new disc/track is automatically displayed (if the Auto Scroll function is set to "ON, " names exceeding 8 characters will be scrolled (page 18)). [. . . ] Before going through the checklist below, check the connection and operating procedures. There is noise in the space between tracks. ⷠA blank space is too short (less than 4 seconds). ⷠA long pause, or a passage of low frequencies or very low sound level is treated as a blank space. [. . . ]