User manual SONY XR-F21RDS

[. . . ] Listening to the same Programme without Manual Retuning even if the Location has changed -- AF Function . Putting Your Personalized Titles onto the CDs -- Disc Memo Function . Detachable front panel enables you to take the front panel away with you when you leave your car (page 5). Caution alarm will be activated if you turn off the ignition key without removing the front panel from the unit. [. . . ] To obtain the beep tone again, press these buttons once more. This function memorizes the adjusted sound characteristics (the bass, treble, and different between volume and sub output level) of each programme source. With this function, you can listen to the same source always in the same sound characteristics even after changing the programme source or tuning the unit off and on again. If these data are not prerecorded on the currently played MD, "NO D. If the title is too long, you can scroll it across SCRL/BTM the display window by pressing the SENS button momentarily. Each time you press the DSPL button momentarily during CD/MD playback, the display on the display window changes as follows: During CD playback: $ Elapsed playback time $ Disc title* $ Clock * If the title has not been registered on the CD changer with the CD custom file function, "NO Name" will appear on the display window. Press the SENS button for more than two seconds during MD playback. N The recording date of the track will be displayed for about three seconds. This applies only if these titles are prerecorded on the MD. During playback, press either side of the SEEK/AMS button the number of times you wish to skip the tracks. *2 If the track title is not prerecorded, "NO T. If the title is too long (more then 10 characters), it will be scrolled automatically. During playback, press and hold either side of the PRST/DISC button. Release the button when you have found the desired part. The first 10 seconds of all the tracks on the currently selected disc are played in order. After the first disc is over, the next disc is played. When you find the desired track, press again . the unit returns to the normal CD/MD playback mode. Note When both CD changer and MD changer are connected, they will function separetedly as an MD or as a CD changer, respectively. Press the button whose number corresponds with the desired disc number for more than one second. -- Repeat Play Functions Playing the currently selected track repeatedly -- Track repeat Press the 2 button during CD/MD playback to get the "REP 1" indication. During playback, press either side of the PRST/DISC button momentarily. [. . . ] Playing the tracks with "SKIP" settings. BANK Press the 4 button several times until you get the "B. The unit starts playing the tracks with "SKIP" settings which have been set by the PLAY/ SKIP edit mode. To go back to the normal playing mode, press BANK the 4 button several times until you get the "B. [. . . ]