User manual SONY XR-L500V

[. . . ] Thank you for purchasing this Sony Cassette Player. You can enjoy its various features even more with: · Optional controller accessories Rotary commander RM-X4S Card remote commander RM-X114 CD TEXT information (displayed when a CD TEXT disc*2 is played on a connected optional CD unit with the CD TEXT function). *1 This unit works with Sony products only. Playing tracks in random order -- Shuffle Play. [. . . ] Presetting different settings for each preset station " Press the desired number button ((1) to (6)) until "MEM" appears. Repeat from step 1 to preset other stations. Note You cannot use this function in some countries where no PTY (Programme Type selection) data is available. Press (DISPLAY/PTY) or (PTY/DSPL) during FM reception until "PTY" appears. "- - - - - - - -" appears if the received station is not an RDS station, or if the RDS data is not received. During radio reception, press (MENU), then press either side of (DISC/PRESET) or (PRESET) repeatedly until "CT-OFF" appears. The CT function may not work even though an RDS station is being received. ⷠThere might be a difference between the time set by the CT function and the actual time. You can also control the unit (and optional CD/ MD units*1) with a rotary commander *3 If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for 2 seconds to turn off the clock indication after turning off the ignition. Using the rotary commander First, attach the appropriate label depending on how you want to mount the rotary commander. Change source (radio/CD*2/MD*2/Tape) Change operation (radio band/CD unit*2/MD unit*2/tape playback direction) Attenuate sound Stop playback or radio reception Adjust the sound menu Change the display item The bass and treble levels can be stored independently for each source. If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Each time you press (SOUND), the item changes as follows: When adjusting with the rotary commander, press (SOUND) and rotate the VOL control. Note Adjust within 3 seconds after selecting the item. Tip You can also change the operative direction of these controls with the unit (see "Changing the sound and display settings" on page 18). Quickly attenuating the sound (With the rotary commander or the card remote commander) Press (ATT) on the rotary commander or card remote commander. Each time you press (SEEK), the item changes. Each time you press (SEEK), the frequency changes. This unit can control external CD/MD units. If you connect an optional CD unit with the CD TEXT function and the custom file function, the CD TEXT information will appear in the display when you play a CD TEXT disc. The volume level is adjustable by 1 dB steps from ­10 dB to +10 dB. " Press (MODE) repeatedly until the desired unit appears. [. . . ] Before going through the checklist below, check the connection and operating procedures. There is noise in the space between tracks. ⷠA blank space is too short (less than 4 seconds). ⷠA long pause, or a passage of low frequencies or very low sound level is treated as a blank space. [. . . ]