User manual SONY XR-6500

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] You can also complete the operation by pressing (LIST) for two seconds instead of step 5. Tune in a station whose name you want to store. Press (MENU), then press M or m repeatedly until "Name edit" appears. Each time you press (DSPL), the item changes as follows: Press (MENU), then press M or m repeatedly until "Name Del" appears. Repeat steps 1 through 4 if you want to erase other names. If you want to put a blank space between characters, select " . Note When you erase all of the station names, "NO Data" appears in step 5. If you press <, the previous character flashes. 3 Repeat steps 1 and 2 to enter the entire name. You can also control this unit with the rotary commander (optional). Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below. *1 If you have not labeled the disc or if there is no disc name prerecorded on the MD, "NO D. name" appears momentarily in the display. *2 If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name. ) *3 If the track name of a CD TEXT disc or MD is not prerecorded, "NO T. During playback, press < or , momentarily for each track you want to skip. Repeat 1 ­ to repeat a track. ⷠRepeat 2 ­ to repeat a disc. Release when you have found the desired point. < (m) : To search backward , (M) : To search forward To return to normal play mode, select "Repeat off" in step 3. Tip If you select the mode using the buttons on the unit, press (1) (REP) repeatedly until the desired mode appears. [. . . ] Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor. ⷠWipe the battery with a dry cloth to assure a good contact. [. . . ]