User manual SONY XR-C410

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. [. . . ] "BL. SKIP" appears on the display. Blanks longer than eight seconds will be automatically skipped during tape playback. Changing the displayed items Each time you press (DSPL) momentarily during tape playback, the displayed item changes as follows: z Tape playback z Clock z Frequency* EN * While the ATA function is activated. Playing a tape recorded in the Dolby B NR system Press the (3) when you want to listen to a tape recorded in the Dolby* B NR system. "a" appears on the display. * Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. "DOLBY" and the double-D symbol a are trademarks of Dolby Laboratories Licensing Corporation. Playing the tape in various modes Searching the desired track -- Intro scan Press (1) during playback. "INTRO" appears on the display. The first 10 seconds of all the tracks are played. When you find the desired track, press again. The unit returns to the normal playback mode. Playing a CrO2 or metal tape Press (4) when you want to listen to a CrO2 (TYPE II) or metal (TYPE IV) tape. To cancel this function, press (4). Playing tracks repeatedly -- Repeat play Press (2) during playback. When the currently played track is over, it will be played again from the beginning. To cancel this mode, press again. 6 Actual total number: Sony XR-C410 (E) 3-810-309-11 (2) 2 Radio 3 Press (SEEK/AMS) to search for the station which you wish to store on the preset number button. To cancel, press again. To reverse To forward Switching to other discs During playback, press either side of (PRESET/DISC). REW PRESET DISC FF Muting the beep tone Press (6) while pressing (SEL). To obtain the beep tone again, press these buttons once more. To return to the previous disc To advance to the next disc 8 Actual total number: Sony XR-C410 (E) 3-810-309-11 (2) Scanning the tracks -- Intro scan The first 10 seconds of all the tracks on the currently selected disc are played in order. After the first disc is over, the next disc is played. "INTRO" appears on the display. When you find the desired track, press again . For more information on "Labelling a CD", refer to page 10. SCHUBERT 2 EN Each time you press (DSPL) during CD playback, the displayed items changes as follows: z Elapsed playback time Clock Z z Disc title Press either side of (SEEK/AMS) to select the track number you want to skip and press (SEL). CD1 DISC TRACK The indication changes from "PLAY" to "SKIP". If you want to return to "PLAY", press (SEL) again. Erasing the disc memo 3 4 Repeat step 2 to set the "PLAY" to "SKIP" mode on all the tracks. The unit returns to the normal CD playback mode. 1 2 3 4 Play the CD and press (LIST) for two seconds. Press (+) or (­) to select the title that you want to erase. Repeat step 3 and 4 if you want erase other titles. The unit returns to the normal CD playback mode. Notes · You can set the "SKIP" mode on up to 24 track. [. . . ] SKIP B DSPL SEEK AMS REW PRESET DISC FF SENS D LOUD MUTE RELEASE TUNER SEL CD TAPE LIST OFF Refer to the pages for further details. 1 LOUD (loudness) button 8 2 During radio reception: Preset number buttons 7 During tape/CD playback: (1) INTRO button 6, 9 (2) REPEAT button 6, 9 (3) SHUF/a (Dolby B NR) button 6, 9 (4) BANK/MTL button 6, 11 (5) ATA (Automatic Tuner Activation) button 6 (6) BL. SKIP button 6 3 BTM (Best tuning memory function) button 7 4 DSPL (display mode change/time set) button 5, 6, 7, 8, 10 5 6 (eject) button 5 6 SEEK/AMS button 6, 7, 8, 10 7 PRESET/DISC button 5, 6, 7, 8 8 SENS (sensitivity adjust) button 7, 9 9 MUTE button 8 0 RELEASE (front panel release) button 4, 12 !¡ SEL (control mode select) button 5, 8, 10 !TM Reset button (located on the front side of the unit hidden by the front panel) Press this button when you use this unit for the first time, when you have changed the car battery, or when the buttons of this unit do not function properly. !£ (+)(­) (volume/bass/treble/balance/ fader control) button 5, 8, 9 !¢ Display window !TUNER (radio on/band select) button 7 !§ POWER SELECT switch (located on the bottom of the unit) See "POWER SELECT Switch" in the installation/Connections manual. [. . . ]