User manual SONY XR-C520

[. . . ] *1 You can connect a CD changer, an MD changer, a CD player, or an MD player. Playing tracks in random order -- Shuffle Play . 1 SEEK/AMS (seek/Automatic Music Sensor/manual search) control 7, 9, 16, 19 2 MODE (*) button During tape playback: Playback direction change 7 During radio reception: BAND select 8, 9 During CD or MD playback: CD/MD Unit select 15, 18 3 SOURCE (TAPE/TUNER/CD/MD) button 7, 8, 9, 15, 18 4 SOUND button 13 5 Display window 6 6 (eject) button (located on the front side of the unit behind the front panel) 7 7 LIST button Station Memo 10, 11 List-up 11 Disc Memo 17, 18 8 PRESET/DISC button During radio reception: Preset stations select 9 During CD/MD playback: Disc change 16 9 DSPL (display mode change) button 7, 10, 11, 15, 17, 18 !TM Reset button (located on the front side of the unit behind the front panel) 5 ! [. . . ] After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above items are scrolled in the display one by one in order. Tip The Motion Display mode can be turned off. Tune in any station and press (LIST) for two seconds. Repeat steps 3 and 4 if you want to erase other names. You can also control the optional CD or MD units with the rotary commander. Depending on how you mount the rotary commander, attach the appropriate label as shown in the illustration below. Note Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. Using the rotary commander Each time you press (SOURCE), the source changes as follows: Rotate and hold the control until you locate the specific point in a track, then release it to start playback. Pressing (MODE) changes the operation in the following ways; * If the corresponding optional equipment is not connected, this item will not appear. Tip When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary commander. refer to "Labelling a CD" (page 17). However, if you use personalized labels, they will always take priority over the original CD TEXT information when such information is displayed. If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, it automatically scrolls across the display as follows: ⷠThe disc name appears when the disc has changed (if the disc name is selected). ⷠThe track name appears when the track has changed (if the track name is selected). When a CD/MD unit is connected, all the tracks play from the beginning. Each time you press (DSPL) during CD, CD TEXT, or MD playback, the item changes as follows: If you press (DSPL) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off. *1 If you have not labeled the disc or if there is no disc name prerecorded on the MD, "NO NAME" appears in the display. 2 * If you play a CD TEXT disc, the artist name appears in the display after the disc name. (Only for CD TEXT discs with the artist name. ) 3 * If the track name of a CD TEXT disc or MD is not prerecorded, "NO NAME" appears in the display. Note For some discs with very many characters, the following cases may happen: -- Some of the characters are not displayed -- Auto Scroll does not work. [. . . ] if the fuse blows , check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. in such a case , consult your nearest Sony dealer. Back of the front panel Notes · For safety, turn off the engine before cleaning the connectors and remove the key from the ignition switch. [. . . ]