User manual SONY XR-C750

[. . . ] The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Press (SHIFT), then press (2) (SET UP) repeatedlly until "LPF" appears. Each time you press (4) (n) or (1) (N), the cut-off frequency in the display changes as follows: When the frequency setting is complete, the display goes back to the normal playback mode. Each time you press (2) (SET UP), the item changes as follows: For the "Contrast" setting, pressing (4) (n) makes the contrast higher, and pressing (1) (N) makes the contrast lower. If you connect an optional CD changer with the CD-TEXT function, the CD-TEXT information will appear in the display when you playback a CD-TEXT disc. If you press (DSPL) to change the display item, the disc or track name of the MD or CDTEXT disc is scrolled automatically whether you set the function on or off. Press (SHIFT), then press (2) (SET UP) repeatedly until "A. Note For some CD-TEXT discs with extremely many characters, the following cases may happen: - Some of the characters are not displayed. Each time you press (DSPL) during CD, CDTEXT or MD playback, the item changes as follows: Press (DSPL) for two seconds during MD playback. The recording date of the track is displayed for about three seconds. $ Elapsed playback time $ Disc name*1 /Artist name*2 $ Track name*3 $ Clock *1 If you have not labeled the CD or there is no disc name prerecorded on the MD, "NO D. 2 * If you play a CD-TEXT disc, the artist name appears in the display after the disc name. (Only for CD-TEXT discs with the artist name) 3 * If the track name of a CD-TEXT disc or MD is not prerecorded, "NO T. During playback, press either side of (SEEK/AMS) once for each track you wish to skip. You can label a personalized name for CDs and CD-TEXT discs with the disc memo function, refer to "Labeling a CD" (page 15). Tip If the name of the CD-TEXT disc or MD is too long, you can scroll it across the display by pressing (SHIFT), then (1) (N). During playback, press and hold either side of (SEEK/AMS). Release the button when you have found the desired point. To search forward To search backward The disc name appears when the disc has changed (if the disc name is selected). ⷠThe track name appears when the track has changed (if the track name is selected). ⷠThe disc or track name appears depending on the setting when you press (SOURCE) to select an MD or CDTEXT disc. Press the number button that corresponds with the desired disc number. You can play the first 10 seconds of all the tracks on the current disc. [. . . ] 1 SEEK/AMS (seek/Automatic Music Sensor/manual search) button 5, 6, 7, 8, 12, 13, 14, 17 2 MODE (band select, changer select, tape transport direction) button 5, 7, 8, 12, 13, 16 3 SOURCE (source select) button 5, 7, 8, 10, 12, 13, 14 4 SOUND button 10 5 Display window 6 6 (eject) button (located on the front of the unit hidden by the front panel) 5 7 DSPL button (display mode change) button 6, 8, 9, 12, 16 8 OPEN button 4, 5, 18 9 LIST button Disc Memo 15 List-up 9, 15 Station Memo 8 !¡ Reset button (located on the front of the unit hidden by the front panel) 4 !Buttons with the same functions as those on this unit. 1 OFF button 2 MODE button 3 SOURCE button 4 SEEK/AMS button You cannot do manual search and manual tuning with the remote commander. [. . . ]