User manual SONY XR-C8200

[. . . ] If your car was parked in direct sunlight resulting in a considerable rise in temperature inside the car, allow the unit to cool off before operating it. ⷠIf no power is being supplied to the unit, check the connections first. If everything is in order, check the fuse. ⷠIf no sound comes from the speakers of a 2-speaker system, set the fader control to the center position. [. . . ] ⷠWhen carrying the front panel with you, use the supplied front panel case. After the clock setting is complete, the display returns to normal play mode. To start playback during fast-forwarding or rewinding, press the other fast-winding button partially until the locked button is released. When fast-forwarding or rewinding with the m or M button, the radio will turn on automatically. During playback, press (BTM) (ATA) repeatedly until "ATA-ON" in the display appears. To return to normal play mode, select "ATAOFF. Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. Each time you press (SOURCE), the source changes as follows: Radio t CD* t MD* * If the corresponding optional equipment is not connected, this item will not appear. Each time you press (MODE), the band changes as follows: The unit stores stations in the order of their frequencies on the number buttons. The unit does not store stations with weak signals. If only a few stations can be received, some number buttons will retain their former setting. The volume level is adjustable by 1 dB steps from ­10 dB to +10 dB. After 3 seconds, the display returns to normal play mode. This unit can control external CD/MD units. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows: ⷠThe disc name appears when the disc has changed (if the disc name is selected). ⷠThe track name appears when the track has changed (if the track name is selected). Press (MODE) until the desired unit appears. If you press (DSPL) to change the display item, the disc or track name of the CD TEXT or MD disc is scrolled automatically whether you set the function ON or OFF. Note For some discs with very many characters, the following cases may happen: -- Some of the characters are not displayed. When a CD/MD unit is connected, all the tracks play from the beginning. Tip With the optional MG Memory Stick System-up Player MGS-X1 connected to this unit, press (SOURCE) to select "MD, " then press (MODE) to select the unit number of the MD (MD1 or MD2, etc. [. . . ] * "SHUF-ALL" is only available when you connect two or more optional CD/MD units. To return to normal play mode, select "SHUFOFF. When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. if the fuse blows , check the power connection and replace the fuse. [. . . ]