User manual SONY XR-CA400

[. . . ] 3-226-699-11 (1) FM/AM Cassette Car Stereo Operating Instructions US Owner's Record The model and serial numbers are located on the bottom of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. XR-CA400 Serial No. For installation and connections, see the supplied installation/connections manual. XR-CA400 2001 Sony Corporation Warning This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] During tape playback, press the desired function button repeatedly until "ON" in the display appears. Rewind To start playback during fast-forwarding or rewinding, press (MODE) (o). Locating a specific track -- Automatic Music Sensor (AMS) During playback, press either side of (SEEK/AMS) momentarily for each track you want to skip. You can skip up to nine tracks at one time. To locate succeeding tracks SEEK AMS Function buttons ( 3 ) REP : ( 5 ) BL SKIP : ( 6 ) ATA : (BTM): MTL Example: ATA function To locate preceding tracks Note The AMS function may not work when: -- the blanks between tracks are shorter than four seconds -- there is noise between tracks -- there are long sections of low volume or quiet sections. DISC REP SHUF BL SKIP ATA MTL 1 2 3 4 5 6 BTM ATA function starts. To return to normal playback function, select "OFF. " 8 Radio Memorizing stations automatically -- Best Tuning Memory (BTM) The unit selects the stations with the strongest signals and memorizes them in the order of their frequencies. You can store up to 6 stations on each band (FM1, FM2, FM3, AM1, and AM2). Caution When tuning in stations while driving, use Best Tuning Memory to prevent accidents. Memorizing only the desired stations You can preset up to 18 FM stations (6 each for FM1, 2, and 3) and up to 12 AM stations (6 each for AM1 and 2) in the order of your choice. 1 2 3 4 Press (SRC)repeatedly to select the tuner. Press (MODE) repeatedly to select the band. Press either side of (SEEK/AMS) to tune in the station that you want to store on the number button. Press the desired number button ((1)to (6) until "MEM" appears. ) The number button indication appears in the display. 1 Press (SRC)repeatedly to select the tuner. Each time you press (SRC) the source , changes as follows: B TUNER TAPE*2 b B CD*1 MD*1 b Note If you try to store another station on the same number button, the previously stored station will be erased. *1 If the corresponding optional equipment is not connected, this item will not appear . After "ATT-ON" momentarily flashes, the "ATT" indication appears in the display. To restore the previous volume level, press (ATT) again. "ATT-OFF" flashes momentarily. "MONO" indicator is displayed. The sound improves, but becomes monaural ("ST" disappears). To return to normal mode, select "MONOOFF. " 10 Changing the sound and display settings The following items can be set: ·A. SCRL (Auto Scroll)* (page 13). ·M. DSPL (Motion Display) ­ the demonstration mode which appears when the tape is ejected and no source is selected (e. g. , tuner is turned off). ·BEEP ­ to turn the beep sound on or off. Selecting the desired item Press (SEL) and the desired preset number button simultaneously. (SEL) + (3): A. SCRL * (SEL) + (4): M. DSPL (SEL) + (6): BEEP * When no CD or MD is playing, this item will not appear. After the mode setting completed, the display returns to normal play mode. Boosting the bass sound -- D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal and high frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS button. Level D. BASS-3 D. BASS-2 D. BASS-1 D. BASS-3 D. BASS-2 D. BASS-1 0dB Frequency (Hz) Adjusting the bass curve Press (D) repeatedly to select the desired bass curve. [. . . ] Indications do not appear in the display. Tape playback Problem The sound is distorted. Cause/Solution The tape head is contaminated. t Clean the head with a commercially available dry-type cleaning cassette. Radio reception Problem Preset tuning is not possible. Cause/Solution · Store the correct frequency in the memory. [. . . ]