User manual SONY XR-M55

[. . . ] AIWA COMPACT DISC STEREO SYSTEM XR-M55 OPERATING INSTRUCTIONS For assistance and information, call toll free 1-800-BUY-AIWA. (United States and Puerto Rico) 8Z-CL6-901-01 981110AWW-X6 ENGLISH pg. 1 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. "CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. " Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] After 4 seconds, the deck enters the recording pause mode. To insert a blank space of less than 4 seconds, press REC/REC MUTE again while is flashing. To insert blank spaces of more than 4 seconds, after the deck enters the recording pause mode, press REC/REC MUTE again. Each time REC/REC MUTE is pressed, a 4-second blank space is added. *This unit does not have the function to locate the beginning of track. Recording cannot be done when TAPE function is selected. To erase a recording 1 Insert the tape to be erased into the deck. 2 Set the tape to the point where the erasure is to be started. 3 Set the reverse mode by pressing TAPE/REV MODE. 4 Press VIDEO/AUX and turn the connected equipment off. 5 Press REC/REC MUTE to start the erasure. RECORDING (cont) pg. 13 AI EDIT RECORDING The AI edit recording function enables CD recording without worrying about tape length and track length. When a CD is inserted, the unit automatically calculates the total track length. If necessary, the order of tracks is rearranged so that no track is cut short. (AI: Artificial Intelligence) AI edit recording will not start from a point halfway into the tape. The tape must be recorded from the beginning of either side. Use the remote control from steps 2 to 4. Insert the tape with the side to be recorded on first facing out from the unit. 2 Press FUNCTION repeatedly until "CD" is displayed and load the disc. 3 Press MODE repeatedly until "AI EDIT" appears on the display. "EDIT" lights up and "AI" flashes on the display. 4 Press numbered buttons 0-9 to designate the tape length. Example: When using a 60-minute tape, press 6 and 0. [. . . ] Erase head x 1 Compact disc player section Laser. Semiconductor laser (=780 nm) D-A converter. 75 dB (1 kHz, 0 dB) Harmonic distortion. . Unmeasurable General Power requirements. [. . . ]