User manual SONY XR-U800

[. . . ] Playing tracks in random order -- Shuffle play . Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Attach part A of the front panel to part B of the unit as illustrated and push until it clicks. The front panel of this unit can be detached to prevent the unit from being stolen. [. . . ] Tip Press either side of (PRESET/DISC) to receive in order the stations stored in the memory (Preset Search Function). Tune in any station and press (FILE) for two seconds. Repeat steps 3 and 4 if you want to erase other names. If you want to put a blank space between characters, select "_" (underbar). If you press (SEL) when the eighth character (farthest right character) is flashing, the flashing part goes back to the first character (farthest left character). 3 Repeat steps 1 and 2 to enter the entire name. To return to the normal radio reception, press (FILE) for two seconds. Tip To erase/correct a name, enter "_" (under-bar) for each character. Each time you press (DSPL), the item changes as follows: You can enjoy clear and powerful bass sound. The D-bass function boosts the low frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even if the vocal volume remains the same. Press (2) repeatedly during CD/MD playback until "REP 2" is displayed. During playback, press either side of (SEEK/AMS) once for each track you wish to skip the tracks. To repeat all the discs in the current unit Press (2) repeatedly during CD/MD playback until "REP 3" is displayed. Each time you press (2) the display changes as follows: REP 1 (Track repeat) REP 2 (Disc repeat) You can label each disc with a personalized name. You can enter up to 8 characters for a disc. If you label a CD, you can locate a disc by name and select the specific tracks for playback. Play the CD and press (FILE) for two seconds. * "REP 3" only when two or more CD/MD units are connected the unit. Playing tracks in random order -- Shuffle play EN To play the tracks on the current disc in random order Press (3) repeatedly during CD/MD playback until "SHUF 1" is displayed. To play all the discs in the unit in random order Press (3) repeatedly during CD/MD playback until "SHUF 2" is displayed. If you want to put a blank space between characters, select "_" (underbar). [. . . ] Distorted cassettes and loose labels can cause problems when inserting or ejecting tapes. If you have drink holders near your audio equipment, be careful not to splash juice or other soft drinks onto the car audio. Sugary residues on this unit or cassette tapes may contaminate the playback heads, reduce the sound quality, or prevent sound reproduction altogether. Cassette cleaning kits cannot remove sugar from the tape heads. [. . . ]