User manual SONY XS-R1611

[. . . ] 3-248-884-11 (1) Specifications Speaker Coaxial 3-way: Woofer 15. 8 cm (6 1/4 in. ) cone type Midrange 3. 5 cm (1 7/16 in. ) balance dome type Tweeter 1. 1 cm ( 7/16 in. ) dome type 180 watts 40 watts 4 ohms 90 dB/W/m 30 ­ 25, 000 Hz Approx. [. . . ] Measure the depth of the area where you are to mount the speaker, and ensure that the speaker is not obstructing any other components of the car. Keep the following in mind when choosing a mounting location: ·Make sure that nothing is obstructing around the mounting location of the rear tray where you are to mount the speaker. ·A hole for mounting may already be cut out of the inner panel of the rear tray. In this case, you need to modify the board only. ·If you are to mount this speaker system in the rear tray, make sure that the speaker terminals, frame or magnet do not touch any inner parts of the car, such as the torsion bar springs (when you open or close the trunk lid), etc. Also make sure that the speaker grille does not touch any inner fittings, such as seat belts, head rests, center brake lights, inner covers of the rear wipers, curtains or air purifiers etc. Rear tray Plage arrière Avant le montage Une profondeur d'au moins 44, 5 mm (1 13/16 po) est nécessaire pour effectuer le montage encastré. [. . . ] Vers le cordon du haut-parleur d'une voiture. 3 [. . . ]