User manual SONY XTL-750W

[. . . ] Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. When replacing the fuse, be sure to use one that matches the amperage described on the original fuse. if the fuse blows , check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. [. . . ] â· This unit is manufactured according to wide-zoom specifications for typical home-use wide TV sets. â· Changing the screen mode will also change the scale of the map screen on your navigation system. Note The video picture does not appear while the car is moving for safety reasons. You can watch video CDs and cassettes recorded in either the PAL or NTSC colour system. Make sure you have connected a video player to the TV tuner unit correctly. Press (TV/VIDEO) to select the input you connected the video player to, VIDEO 1 or VIDEO 2. Each time you press (TV/VIDEO), the indication changes as follows. Turn the video player on and begin playback. The unit displays PAL or NTSC colour system video pictures and the following display appears for five seconds. Listening to the TV/video Sound with the Picture Off (Visual off function) You only hear the sound of the selected programme. to cancel the visual off function , press (V OFF) again. If you turn the unit off or turn the ignition switch to the OFF position, the visual off function will be cancelled. The visual off function is also canceled when you select another TV programme with the programme number buttons (TV only). Each time you press (SEL), the items change as follows. Note You do not need to adjust HUE when watching a TV programme or playing back PAL video sources. When you press (SEL), only COL and BRIGHT appear. Press one of these buttons within five seconds. The item will be cancelled after five seconds if you do not touch the (+) or (-). Colour For more colour intensity Y For less colour intensity Hue To make the picture greenish Y To make the picture reddish Brightness To brighten the picture Y To darken the picture To restore the factory settings, press (SEL) for more than two seconds. When the picture is too dark or too bright from the viewing position, press (SEL) to select BRIGHT and press (+) or (-). [. . . ] However, there is a possibility that less than 0. 01 % of the segments are defective and may not light up properly. However, these segments will not interfere with your viewing. 100 g (including batteries) TV aerial (VCA-114) Cord 5 m, 75 ohm Supplied accessories Wireless remote (1) Power input cord (1) Monitor cable (1) TV aerial (1) Parts for installation and connections (1 set) Mounting kit (1 set) Optional accessories Power switch adaptor XA-15 Design and specifications are subject to change without notice. [. . . ]