User manual SONY XT-U500V

[. . . ] Press the Source button until "MD" is displayed, then press the Mode button to select XM. For master units which can control more than one MD changer, press the Mode button repeatedly (the display will show "MD1, " "MD2, " etc. ) until the receiver is found. XM Satellite Radio Receiver Operating Instructions 1 Press the Repeat (REP) button to enter category search mode. The category of the current channel is displayed. With some master units, the Repeat button is only equipped on the remote control. Dimensions Mass Supplied accessories 2 3 Introducing XMTM Satellite Radio There's a world beyond AM and FM. With many commercial-free music channels. [. . . ] Check the connection of the receiver and the antenna. Owner's Record The model number is located on the bottom and serial number also on the bottom. Record the serial number in the space provide below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. XM Radio ID How to Subscribe Listeners can subscribe by visiting XM on the Web at www. xmradio. com or by calling XM's Listener Care at (800)852-9696. Customers should have their Radio ID ready; it is located on the bottom of the main unit, and you can also check it in the display of this unit (see "Displaying the XM Radio ID"). It is prohibited to copy, decompile, disassemble, reverse engineer or manipulate any technology incorporated in receivers compatible with the XM Satellite Radio system. Furthermore, the AMBE® voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. The user of this or any other software contained in an XM Radio is explicitly prohibited from attempting to copy, decompile, reverse engineer, or disassemble the object code, or in any other way convert the object code into human-readableform. The software is licensed solely for use within this product. Display items The XM Satellite Radio information (Channel Name, Channel Number, Artist Name/Program Name and Song Title) is available on the display. 4 To exit from category search mode and return to the normal mode, press the Repeat (REP) button. The radio automatically returns to the normal mode if there no key is pressed within 5 seconds. Press the Display (DSPL) button. Each time you press the Display (DSPL) button, the item changes as follows: Channel Name t Channel Number t Artist Name/Program Name t Song Title t For MEX-5DI, press the ENTER button of the remote control to change the display item. Notes · While Artist Name/Program Name or Song Title is displayed, if you select a channel, Channel Name will be displayed for 2 to 3 seconds and then return to the previous display. · If there is no information about Artist Name/ Program Name or Song Title, "- - - -" will be displayed. · During XM Satellite Radio reception, Spectrum Analyzer, Dual Information, Motion Display function of the master unit cannot be operated. This is not an error. Resetting the master unit Before operating the XM receiver for the first time, reset the master unit. If the unit is not reset in this manner, it may not function properly. For details on how to reset it, refer to the operating instructions of the master unit. 4 Press the Disc/Preset + (Disc +) button for 2 seconds. The display shows "MEMORY" if the radio successfully stores the channel into the preset. The display shows "FAILURE" if the radio fails to store the channel into the preset. The radio automatically returns to the normal mode if there no key is pressed within 5 seconds. Caution For the following master units, press the Repeat (REP) button of the master unit for two seconds after turning the XM on and select "setup 2. " Without this procedure, the master unit will not display tuning-in information from the receiver correctly. Except for the following master units, "setup 1" is selected in the factory settings. CDX-C8050X CDX-C800REC* CDX-M750 CDX-M650 CDX-M610 CDX-M600 MDX-C8500X XR-M550 * You may observe flickering in parts of the display while performing operations. Note Resetting the master unit will erase the clock setting and some stored contents of the master unit. Receiving a stored channel · Press either Disc/Preset button to select the preset channel you want to listen to. · Press the Shuffle (SHUF) button. Press the Disc/Preset + (DISC +) button to select the preset channel and then press the SEEK + or SEEK ­ button to start. If you have any questions or problem concerning this product, consult your nearest Sony dealer. If you have any questions or problem concerning the XM Satellite radio service including the broadcast, consult XM. [. . . ] -- The fuel tank should not be damaged by the tapping screws. -- There should be no wire harnesses or pipes under the place where you are going to install the unit. -- The spare tire, tools or other equipment in or under the trunk should not be interfered with or damaged by the screws or the unit itself. · Be sure to use only the supplied mounting hardware for a safe and secure installation. [. . . ]