User manual SONY XV-D1000

[. . . ] • Check the model name on the bottom of your camera. Checking the supplied items The number in parentheses indicates the number of pieces. • Camera (1) • Rechargeable battery pack NP-BG1 (1)/Battery case (1) • Micro USB cable (1) • AC Adaptor AC-UB10/UB10B/UB10C/UB10D (1) • Power cord (mains lead) (not supplied in the USA and Canada) (1) • Wrist strap (1) • Instruction Manual (this manual) (1) GB 2 Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. [. . . ] on the camera for the first Date & setting is displayed when you turn time. • It may take time for the power to turn on and allow operation. 2 Select a desired language. location 3 Select a desired geographic press z by following the on-screen instructions, then on the control wheel. & Time Format], [Daylight Savings] or 4 Set [Date Time] and [Date & Time], then select [OK] t [Summer [OK]. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. instructions screen. 5 Follow thepack will run outon the when: • The battery quickly – [GPS setting] is set to [On] (DSC-HX10V only). Resolution] is set to [High]. GB 16 Shooting still images/movies Shutter button MOVIE Mode dial : Intelligent Auto : Movie Mode W/T (Zoom) lever W: zoom out T: zoom in Do not cover the flash (A). Shooting still images button halfway down to focus. 1 Press the shutterfocus, a beep sounds and the z indicator lights. When the image is in 2 Press the shutter button fully down to shoot an image. Shooting movies (Movie) button to 1 Press the MOVIElever to change the zoomstart recording. • Use the W/T (zoom) scale. • Press the shutter button to shoot still images while continuing to record the movie. 2 Press the MOVIE button again to stop recording. Notes • Do not push down or pull up the flash manually. • The sound of the lens and lever operating will be recorded when the zoom function operates while shooting a movie. The sound of the MOVIE button operating may also be recorded when movie recording is finished. When [Toy camera] is selected in Picture Effect, sets the color hue. 20 Extracted Color Watercolor Effect Illustration Effect EV ISO White Balance Focus Metering Mode Cont. Shooting Interval Bracket Setting Scene Recognition Soft Skin Effect Smile Shutter Smile Detection Sensitivity Face Detection Anti Blink When [Partial Color] is selected in Picture Effect, selects the color to extract. When [Watercolor] is selected in Picture Effect, sets the effect level. When [Illustration] is selected in Picture Effect, sets the effect level. Select the metering mode that sets which part of the subject to measure to determine the exposure. Select the number of images taken per second for Burst shooting. Set to automatically detect shooting conditions. Set the Soft Skin Effect and the effect level. Set to automatically release the shutter when a smile is detected. Set the Smile Shutter function sensitivity for detecting smiles. Select to detect faces and adjust various settings automatically. [. . . ] These dots are a normal result of the manufacturing process, and do not affect the recording. Notes on the flash • Do not carry the camera by the flash unit, or use excessive strength on it. • If water, dust or sand get into the open flash unit, it may cause a malfunction. On camera’s temperature Your camera and battery may get hot due to continuous use, but it is not a malfunction. GB 27 On the overheat protection Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera. A message will be displayed on the screen before the power turns off or you can no longer record movies. In this case, leave the power off and wait until the camera and battery temperature goes down. [. . . ]