User manual SONY ZS-BT1

[. . . ] CAUTION 3-099-777-21(1) The use of optical instruments with this product will increase eye hazard. Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Basic Operations To Pause playback Stop playback Go to the next track Go back to the previous track Locate a point while listening to the sound Information Press . (forward) or (backward) while playing and hold it 4 Enter the passcode. Passcode entry may be required depending on the type of Bluetooth device. [. . . ] 2 Establish a connection with the Bluetooth headphones. Press and hold BLUETOOTH OPR on the unit for about 2 seconds until the BLUETOOTH indicator lights up, then release the button. If more than one Bluetooth device that has been connected in the past is present around the unit, the unit attempts to connect with up to 3 most recently connected devices. (Connection is attempted with up to 3 devices in order from the most recently connected device, and the attempts end when a connection is established. ) Once the connection is established, the unit display changes as follows: "LINKED" Name of the Bluetooth device in step 1. Depending on the type of Bluetooth headphones, you can operate this unit (playback, volume control, etc. ) using the headphone's controls. For details about the operations of the Bluetooth headphones, refer to the operation manual supplied with your Bluetooth headphones. 3 Start playback of the music for the function selected use the same frequency band (2. 4 GHz). When using your Bluetooth device near a device with wireless LAN capability, electromagnetic interference may occur. This could result in lower data transfer rates, noise, or inability to connect. If this happens, try the following remedies: Try connecting this unit and Bluetooth mobile phone or Bluetooth device when you are at least 10 meters away from the wireless LAN equipment. Turn off the power to the wireless LAN equipment when using your Bluetooth device within 10 meters. The radio waves broadcast by this unit may interfere with the operation of some medical devices. Since this interference may result in malfunction, always turn off the power on this unit, Bluetooth mobile phone and Bluetooth device in the following locations: In hospitals, on trains, in airplanes, at gas stations, and any place where flammable gasses may be present Near automatic doors or fire alarms Notes This unit supports security functions that comply with the Bluetooth specification as a means of ensuring security during communication using Bluetooth technology. However, this security may be insufficient depending on the setting contents and other factors, so always be careful when performing communication using Bluetooth technology. Sony cannot be held liable in any way for damages or other loss resulting from information leaks during communication using Bluetooth technology. Bluetooth communication is not necessarily guaranteed with all Bluetooth devices that have the same profile as this unit. Bluetooth devices connected with this unit must comply with the Bluetooth specification prescribed by the Bluetooth SIG, Inc. , and must be certified to comply. However, even when a device complies with the Bluetooth specification, there may be cases where the characteristics or specifications of the Bluetooth device make it impossible to connect, or may result in different control methods, display or operation. Noise may occur or the audio may cut off depending on the Bluetooth device connected with this unit, the communications environment, or surrounding conditions. Using the display You can check information about the CD using the display. Playing preset radio stations 1 Press RADIO BANDAUTO PRESET on the unit on the remote) to tune in the stored station. (RADIOBAND on the remote) to select the band. Discs that this unit CAN play Audio CD CD-R/CD-RW (CD-DA*) * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs. radiation, such as a wireless LAN, other Bluetooth device, or a microwave oven nearby, move them away. Turn down the volume of the connected Bluetooth device. To check the total track number and playing time of the CD Press to stop the CD playback. 1 Press CD . "CD" appears in the display. 2 Press PRESET + or ­ on the unit (PRESET + or ­ Discs that this unit CANNOT play CD-R/CD-RW other than those recorded in music CD CD-R/CD-RW of poor recording quality, CD-R/CD-RW The sound from the Bluetooth headphones is distorted. Turn down the volume of the unit using VOLUME format 2 Press MODE repeatedly until "PGM" flashes in the display. Falling asleep to music 1 Play the music source you want. 2 Press SLEEP on the unit to display "SLEEP". [. . . ] The nameplate indicating operating voltage, power consumption, etc. is located at the bottom. Reorient the unit itself to improve AM reception. To cancel Repeat Play Press REPEAT until " If a station cannot be preset automatically " disappears from the display. On placement Do not leave the unit in a location near heat sources, You need to preset a station with a weak signal manually. 1 Press RADIO BANDAUTO PRESET on the unit (RADIOBAND on the remote) repeatedly to select the band. Playing tracks in random order (Shuffle Play) You can play tracks in random order. Supported Bluetooth version and profiles 2 Tune in a station you want. 3 Hold down ENTER on the unit repeatedly for Profile refers to a standard set of capabilities for various Bluetooth product capabilities. This unit supports the following Bluetooth version and profiles. [. . . ]