User manual SONY ZS-E5 annexe 1

[. . . ] By ensuring these batteries are disposed of correctly, you will help prevent potentially negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of the battery. The recycling of the materials will help to conserve natural resources. In case of products that for safety, performance or data integrity reasons require a permanent connection with an incorporated battery, this battery should be replaced by qualified service staff only. [. . . ] batteries) Supplied accessory AC power cord (1) Design and specifications are subject to change without notice. Radio section Frequency range FM: 87. 5 - 108 MHz AM: 530 - 1 710 kHz Antennas FM: Telescopic antenna AM: Built-in ferrite bar antenna Basic Operations Precautions Discs that this unit CAN play · Audio CD · CD-R/CD-RW (CD-DA*) * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs. Troubleshooting General The power is not on. · Connect the AC power cord to the wall outlet securely. · Make sure the batteries are inserted correctly. · Replace all the batteries with new ones if they are weak. Discs that this unit CANNOT play · CD-R/CD-RW other than those recorded in music CD format · CD-R/CD-RW of poor recording quality, CD-R/CDRW that has scratches or are dirty, or CD-R/CD-RW recorded with an incompatible recording device · CD-R/CD-RW which is finalized incorrectly Noise is heard. · Someone is using a portable telephone or other equipment that emits radio waves near the player. Move the portable telephone, etc. , away from the player. Notes on discs CD player The CD does not play or "­ ­" is displayed even when a CD is in place. · Place the CD with the label surface up. · Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. · There is a problem with the quality of the CD-R/ CD-RW, recording device or application software. · Replace all the batteries with new ones if they are weak. · Before playing, clean the CD with a cleaning cloth. If there is a scratch, dirt or fingerprints on the CD, it may cause tracking errors. have a tactile dot. Playing a CD 1 Pull PULL OPEN to open the CD compartment lid and place a disc on the pivot in the center of the tray. Listening to the radio 1 Set the function selector to RADIO. OPR/BATT indicator turns on. · Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. · Do not expose the CD to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight, as there can be a considerable rise in temperature inside the car. · Do not stick paper or stickers on the CD, nor scratch the surface of the CD. · After playing, store the CD in its case. The sound drops out. 2 Select a desired band using . 3 Tune in to the station using TUNE . If FM stereo reception is too weak, the reception switches to monaural. On safety Connecting optional components 2 Close the CD compartment lid. 3 Set the function selector to CD. OPR/BATT indicator turns on and total track number appears in the display after "­ ­" blinks. [. . . ] The OPR/BATT indicator turns on and the sound from the connected component is output from the speakers of this unit. To connect the unit to a TV or VCR, use an extension cable (not supplied) with a stereo-mini jack on one end and two phono plugs on the other end. · Do not leave the player in a location near heat sources, in a place subject to direct sunlight, excessive dust, or mechanical shock, or in a car subject to the direct rays of the sun. · Do not place the player on an inclined or unstable place. [. . . ]