User manual SONY ZS-M1

[. . . ] Never use the plug without the fuse cover. If you should lose the fuse cover, please contact your nearest Sony service station. This Compact Disc/MiniDisc player is classified as a CLASS 1 LASER product. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] , track marks may not be added correctly. A number of tracks may be included in a single track. You can divide these tracks into separate tracks, and add a new track mark to each track. All tracks following the divided tracks are renumbered. tips · To put the divided tracks together, see "Combining recorded tracks" on page 46. To divide a track during recording, press REC at the point where you want to add the track mark. note If "Sorry" appears in the display , you cannot divide the track. If you repeat editing on the MD, you may not be able to divide a track. This is due to the system limitations of the MD (page 68), but not caused by malfunction. Example: Dividing track 1 into three tracks Track 1 is divided, and the track marks 2 and 3 are added. While playing the MD, press MD ^ the point at where you want to create a new track. Track number Moving Track number of the C changes to 1 1 C 2 A 3 B 4 D 1 A 2 B 3 C 4 D Play the track you want to move. Turn the jog dial to select the new track position. If you want to cancel the move function at this point: PressNO· "Complete" appears in the display for a few seconds after the track is moved. Either during recording or after recording, you can label the MDs and the tracks you have recorded with letters, numbers and symbols. You can input up to about 1, 700 characters into each MD. You can label both MDs and tracks during synchronized recording of a whole CD (page 6) or the tracks you programmed (page 34). You can label the tracks only during synchronized recording of a single track ­ REC IT (page 33). During synchronized recording of a whole CD or the tracks you programmed You can label an MD or a track with up to 50 characters. If you want to label more than 30 tracks, label the tracks after recording (page 52). When recording a CD containing CD text information, a track name appears in the display at the time of labelling. Change the name according to step 3 on page 50, if necessary, then press YES· eNTER. [. . . ] A stereo programme cannot be received in stereo. Replace all the batteries in the remote with new ones if they are weak (page 61). Make sure that you are pointing the remote at the remote sensor on the player. Remove any obstacles in the path of the remote and the player. [. . . ]