User manual SONY ZSS2IP-WHITE

[. . . ] 3-271-628-11(1) Power sources Precautions Discs that this unit CAN play · Audio CD · CD-R/CD-RW (CD-DA*) * CD-DA is the abbreviation for Compact Disc Digital Audio. It is a recording standard used for Audio CDs. Troubleshooting General The power is not on. · Connect the AC power cord to the wall outlet securely. · Make sure the batteries are inserted correctly. · Replace all the batteries with new ones if they are weak. [. . . ] To return to normal sound, press the button again. Notes on DualDiscs A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side. However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. To cancel the sleep function Press POWER to turn off the power. For customers in the USA Music discs encoded with copyright protection technologies This product is designed to playback discs that conform to the Compact Disc (CD) standard. Recently, various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product. Please register this product on line at http://www. sony. com/productregistration. Proper registration will enable us to send you periodic mailings about new product, services and other important announcements. Registering your product will also allow us to contact you in the unlikely event that the product needs adjustment or modification. Thank you. On operation For carrying the unit Always remove the iPod and store the sliding tray when carrying the unit. · If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lens inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate. · Reorient the player itself to improve AM reception. Cleaning the cabinet · Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. The audio is weak or has poor quality. · Replace all the batteries with new ones if they are weak. · Move the player away from the TV. Important Safety Instructions 1) 2) 3) 4) 5) 6) 7) Read these instructions. Install in accordance with the manufacturer's instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. CAUTION The use of optical instruments with this product will increase eye hazard. [. . . ] The display changes as follows: 2 Press . The iPod begins to play. You can operate the connected iPod by the unit or the iPod buttons. To The current track number and playing time The current track number and the remaining time of the current track* The number of tracks left and remaining time on the CD Listening to the radio 1 Press RADIO·BAND·AUTO PRESET repeatedly (direct power-on) or press RADIO and press BAND repeatedly on the remote. Each time you press the button, the indication changes as follows: "FM" "AM" digits begin to change in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. [. . . ]