User manual SOUNDCRAFT 200 DELTA

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: * Reorient or relocate the receiving antenna * Increase the separation between the equipment and the receiver * Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * Consult the dealer or an experienced radio/TV technician for help For further details contact Harman International Industries Ltd, Cranborne House, Cranborne Road, Potters Bar, Hertfordshire EN6 3JN, UK Telephone +44(0) 1707 665000 Fax +44 (0)1707 660742 email: soundcraft@harman. com © Harman International Industries Ltd. Parts of the design of this product may be protected by worldwide patents. [. . . ] Channel Faders assigned to Stereo channels. 26 Soundcraft Si Compact User Guide 0311 CHANNEL FADERS AND ASSOCIATED KEYS & DISPLAYS 1 2 4 3 5 6 7 1. Global Mode Encoder & Display ­ See GLOBAL MODE for more detail on this function. Level Meter: Input level to the channel or Bus Master level when in BUS or MTX modes. Gain Reduction Meter: Indicates gain reduction in the channel or bus. Gate Closed Indicator: Indicates the noise gate is CLOSED on the channel; has no function in any other mode. ON Key: Function varies according to mode/ setting of fader layers: · Input, Bus or Matrix: toggles the channel or bus ON/OFF. · Follow Mode: Toggles the send from channel/bus `n' to bus `x' ON/OFF. · GEQ Mode: Resets the GEQ band gain to 0dB. SEL Key: Selects the channel or bus to the ACS. SOLO Key: Will SOLO the channel or bus; actual mode will depend upon the settings in the SOLO menu and status of other SOLO functions within the system. See SOLO MENU for more information on the solo system operation. The screen shot below shows the compressor: on channel named `Kick Drum'; the control being adjusted is the largest of the roundels (THRESHold), whilst all controls within the group are indicated in the smaller roundels at the bottom of the screen. 30 Soundcraft Si Compact User Guide 0311 SCREENS The Soundcraft Si Compact has such a versatile control surface that the colour touch screen is never required for mixing and is employed only for editing parameters like naming, channel setup and patching. Typical main MENU screen & associated controls: 1. Title Bar ­ Name of the active cue on the console. MENU key: Return to main menu page, lit when on any page other than MENU. APPLY key: Press when lit to confirm a change to name or similar. SCROLL/ADJUST: Press to access editing of a parameter or confirm a list view selection, scroll to edit a parameter. 1 2 4 3 SHOW MENU IMPORT: Import a show from USB key, this will over-write the current show and all settings on the console. A warning dialogue allows the action to be aborted. NOTE: When using the Off-Line Editor importing a show opens a typical Windows `Open File' window. 31 Soundcraft Si Compact User Guide 0311 NEW SHOW: Deletes all current cues on the console; patching, naming and audio settings remain unchanged allowing a new show to retain known good references such as system EQ settings. A warning dialogue allows the action to be aborted. EXPORT: Allows the current active show to be exported to the USB drive. The system displays the QWERTY keyboard allowing the show name to be edited. NOTE: When using the Off-Line Editor importing a show opens a typical windows `Save File' window. [. . . ] A term used to describe the relationship of two audio signals. In-phase signals reinforce each other, out-of-phase signals result in cancellation. Phase is a measurement of relative displacement between two waves of identical frequency. A term used to describe the orientation of the positive and negative poles of an audio connection. [. . . ]