User manual SOUNDCRAFT 200SR

[. . . ] 4 Si Compact CONTROL zone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Adding Modules & Stageboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Adding Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Adding Stageboxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 8 To change an encoder aux mode: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48V: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48V: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48V: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 To copy a channel: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 To rename a channel on an OLED: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 To pan the virtual console: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 To zoom the virtual console in or out: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 To scroll across faders on Si Compact 24 & 32: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Registered Office: Harman International Industries Limited, Cranborne House, Cranborne Road, Potters Bar, Hertfordshire EN6 3JN. These names will then be used on the console touch screen. NOTE: When a card is added, the system will by default set all OUTPUT routing switches `ON'. To enable the external inputs to the option card to be routed to the Si expansion bus, one or more of the input ranges must be enabled, this is achieved by `clicking' one of the four available input ranges; this action simulates the setting of the physical DIP switches on the option card. NOTE: For detailed information regarding DIP switch settings please see Option Slot & Option Card User Guide available from the Si web page. NOTE: Si Compact has only a single option card slot Adding Stageboxes If you are adding a MADI card a stagebox icon will appear beside the card prompting you that a stagebox may be connected to this card: Click the grey stagebox icon to `connect' the stagebox and begin configuring the modules. . . To configure the stagebox `right click' on any slot to remove a card or add a card. For help in understanding the various configurations click on the `?' icon to open a browser and download copy of the Soundcraft Studer I/O Racks manual which describes the rules that govern legal card configurations. Access Help document Colour code identifies inputs (blue) or outputs (red) Input MADI channel positions & range within the MADI stream, similar for outputs. This configuration shows both cards receiving signals from all channels of the Si expansion bus, but the AES card is routed to expansion bus inputs 1-8 whilst the MADI card is routed to inputs 17 to 64. It is possible to rename the stagebox short and long names in the same manner as for renaming option cards. NOTE: Some D21m cards including MADI and CobraNetTM provide the facility to `shut-down' channels in order that they do not occupy all the MADI channels in the link back to the console. In these cases a `drop-down' is provided beside the MADI channel position indicator to allow this to be set; it is important this matches the switch setting of the card in the stagebox else an I/O conflict may result. NOTE: As MADI channels are allocated according to their position in a rack care must be taken when using multiple stageboxes to ensure a valid configuration. . . Example 1: Stagebox 1 is a Vi stagebox with 8x 8 channel mic cards in slots A-H and is using MADI card 1 with channels 1-32 enabled. Stagebox 2 is a Compact Stagebox with 2x 16 channel mic cards in slots A/B and C/D. [. . . ] The system will not allow two option cards to `talk' to the same `range' of inputs therefore if multiple cards are used connections will result in something similar to the above. The system requires that the setting of the INPUT and OUTPUT routing switches on the `virtual' system match any `physical' cards installed in the console. Refer to the Si Option Card User Guide for more information on this topic. NOTE: Not applicable to Si Compact To toggle an encoder bus send level: Press [LEFT CTRL] + hold [LEFT MOUSE] Note: When in Bus Send mode, toggles bus send level between -infinity and 0dB. [. . . ]