User manual SOUNDCRAFT 328

[. . . ] EMC was achieved using TDIF screened cable with metal D backshells, and RCA Phono cables using GAC-1 cable with Deltron gold plated connectors. !& SPIRIT AES/EBU INTERFACE www. spirit-by-soundcraft. co. uk www. digital328. com USER GUIDE Refer also to the Digital 328 User Guide Spirit by Soundcraft, Harman International Industries Ltd. , Cranborne House, Cranborne Road, Potters Bar, Herts. , EN6 3JN UK. [. . . ] 2 TDIF-1 25-pin female D-type connector - This port is used to transfer the digital audio to and from the Digital 328, or compatible hardware. 3 Input Error Code Map - This map on the front panel of the unit describes how the unit indicates the following errors in the incoming AES/EBU datastream: Operation The Interface is an external accesory for the Digital 328 and other forthcoming Spirit Digital consoles, although it may also be used for other applications. The interface provides 4 stereo pairs (8 channels) of digital AES/EBU which can be routed to and from either of the console TDIF ports. l As an 8 channel Interface to any single / multiple AES/EBU source or destination. Connect the TDIF cable from the Interface to the port required on the console. Select TDIF as the port type from the Tape Port Select Menu on the Digital 328. <Tape Ch17_>24 > Bank Source:TDIF 4 Channel Error Indication - Four sets of three error flag indicators - each set for one stereo AES input. 5 Clear Error Switch - This will reset the error detection circuit - and clear any errors presently indicated. 6 Power Indicator - this indicates that the unit is receiving power from the input on the rear panel. You will now be able to bring in the connections to the interface on Tape Returns 17-24 (Port A), or 25-32 (Port B). The outputs from the interface can be fed directly from the Mic/Line channels by selecting T. SND DIR on the appropriate channel. When T. SND DIR is not selected on any of the Mic/Line channels, the ports will be fed with Groups 1-8 sequentially. Digital Audio Synchronisation Connection Leads This unit should be connected to the 328 using a standard TDIF cable. [. . . ] It is not possible to synchronise the interface from the AES input. Rear Connections Front Panel Specifications Bit Depth Sampling Rate Dimensions Power Supply 16/20/24 bits selectable from source 9v AC 3. 5W 220mm (W) x 157mm (L) x 48mm (H) 44kHz to 50kHz selectable from source [. . . ]