User manual SOUNDCRAFT D-MIX 1000 BROCHURE

[. . . ] Available in a modular 19" format, the D-MIX 1000 allows the DJ or installer complete freedom of layout; mono and stereo modules are interchangeable, allowing the console to be custom configured to provide the right facilities for every user. But the biggest benefit that the D-MIX 1000 offers is confidence. Soundcraft professional audio consoles are designed to work hard - with thoughtful details such as revolutionar y faders which prevent damage from liquids or dirt and a plug-in crossfader for ease of servicing - to give the best performance under extreme conditions - all night, every night. Mono Input Module Each Mono module will accept a Mic and Line level input with gain adjustment to allow for different source sensitivities. [. . . ] Two Mono input modules are fitted as standard. Stereo Input Module The D-MIX 1000 provides the DJ with six dual stereo inputs as standard. Each Stereo module permits the connection of two switched stereo sources (such as CD players, DAT machines or VTRs). Line 1 input may be selected inter nally to provide RIAA equalisation for turntables. Input gain is varied by +/10dB using a rotary control for optimising levels. The Stereo module uses a similar EQ section to the Mono input, but with a +/-6dB range for more subtle correction. A mono sum of the stereo signal may be fed to the Aux 1 bus via the rotary level control for zoning or special effects. The stereo balance may be adjusted by up to +/-6dB to compensate for a differential between the Left and Right inputs. Routing is similar to the Mono input, with the A/B crossfader being used for rapid and accurate transitions between sources. All routing switches are illuminated for instant identification. The large, illuminated On switch is used to enable each input and also as a remote start for turntables, CD players and other equipment. The Cue switch routes the pre fade signal in stereo to the DJ's headphones and booth monitors if required. A highquality 100mm fader controls the overall input signal level. w Master Module The D-MIX 1000 Master module may be located anywhere in the fr ame to allow for individual preferences. Mono and stereo master outputs are provided with separate 100mm long-throw faders, as well as an A/B crossfader mounted on a removeable panel for ease of servicing. [. . . ] In addition to the main and Aux outputs, an isolated mono feed is available for sound-to-light triggering; a pre fade stereo Record output and 20Hz-80Hz sub-bass feed are also provided as standard, to simplify the installation of an integrated system. Installation and Powering The D-MIX 1000 is powered by an external DCP100 supply, which will accept mains voltages between 110V and 240V. The console occupies 8U of space in a standard 19" rack; all permanent connections are made under neath the unit to save space . [. . . ]