User manual SOUNDCRAFT FAME V2

[. . . ] Coaxial digital S/PDIF cables can also be connected from the Lexicon Studio LDI-12T S/PDIF output to the Digital 328 S/PDIF input and vice versa. The recommended method of synchronization is to utilize the Wordclock Out feature of the Digital 328. 328 Wordclock Out Lexicon Studio Wordclock In Lexicon Studio S/PDIF Out 328 S/PDIF In 328 S/PDIF Out Studio S/PDIF In Lexicon 328 ADAT Out 1 Lexicon Studio ADAT In Lexicon Studio ADAT Out ADAT In 1 328 The ADAT connections allow digital transfer of either direct output for input channels 1-16 to the Lexicon Studio LDI-12T card, or the Digital 328's 8 Group outputs. [. . . ] The S/PDIF output from the console can be assigned to either the Mix output or 1 of 3 stereo auxiliary outputs. The 328 S/PDIF Input can be configured to be a digital Stereo Input or as a digital 2 Track Return. Spirit Digital 328 v2 2 Digital 328 Setup Wordclock To configure the Digital 328 as the wordclock master, enter the 328 Menu pages by pressing the <MENU> button on the right hand side of the LCD display. Using the encoder beneath the display, scroll up or down until the `Clock Source Sel' menu is highlighted, and press <ENTER>. Here, either the internal 44. 1kHz clock or the internal 48kHz clock must be selected, depending on the sampling rate at which work is to be done. Press <ENTER> to set the sample rate and <MENU> to return to the menu pages. 2 <Wordclock Src. > Internal:44. 1kHz or <Wordclock Src. > Internal:48. 0kHz Tape Ports To ensure that the Digital 328 Tape Ports are set to ADAT to work with the Lexicon Studio LDI12T, enter the 328 Menu pages by pressing the <MENU> button on the right hand side of the LCD display. Using the encoder beneath the display, scroll up or down until the `Tape Port Select' menu is highlighted. Press <ENTER> and keep pressing the Up cursor arrow until the `<Tape Ch17-24 >' menu page is displayed. and select `Clock Source' from the page options. Click on the drop down menu and select WCBNC as the clock source input. If you do not have a wordclock cable connected, the Lexicon Studio LDI-12T must slave to the clock on one of its ADAT or S/PDIF inputs. Set the Lexicon Studio LDI-12T to use the clock source from the ADATDATA 12T input or the SPDIF 12T Input as required using the method described above. If the wordclock cable is available, the Lexicon Studio LDI-12T should slave to the clock on the BNC wordclock input. Lexicon Studio Setup Guide 5 Audio Data The Lexicon Studio LDI-12T must now be set up to transmit and receive audio data to and from the Digital 328. Open the Lexicon Studio Control Panel, by double clciking the Lexicon Studio icon in the taskbar. and select `CtrlI/O' from the page options. Leave the virtual faders for the input and output level at their default positions, this is correct for the Digital 328. Now select S/PDIF RCA in the `Input' settings, this forces the Core32 to recieve the ADAT signal from the Digital 328. [. . . ] Now select S/PDIF RCA in the `Input' settings, this forces the Core32 to recieve the ADAT signal from the Digital 328. The in the `Output' settings select S/PDIF RCA / ADAT OPTICAL, this forces the Core32 to send audio from the ADAT port to the Digital 328. [. . . ]