Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SOUNDCRAFT FX16. We hope that this SOUNDCRAFT FX16 user guide will be useful to you.
Lastmanuals help download the user guide SOUNDCRAFT FX16.
Detailed instructions for use are in the User's Guide.
[. . . ] 16 Direct Outputs are individually switchable pre or post fader, making them equally useful for multitrack recording or live use. Both Solo In Place and PFL solo are available, for studio monitoring and channel gain set-up applications respectively. All 16 mic/line inputs are equipped with high quality UltraMicTM preamps while a `truly British' 3-band EQ with swept mid benefits from custom designed pots which give greater control across carefully chosen frequencies. There are 4 Auxiliary Sends, including a dedicated effects send, 1 prefade send and 2 pre/post-fader selectable sends which are equally useful as extra foldback sends or as effects sends in studio mixdown situations. [. . . ] Line Input A balanced 1/4" jack for connecting balanced or unbalanced electronic instruments, such as keyboards. Insert Used for patching in compressors or additional EQ or for other signal processors. It can also be used for recording to multi-track recorders if necessary. Gain A rotary gain control on each input alters the gain of the input signal, from +5 to +60dB (Line Inputs have -15dB attenuation). Linear circuitry within the preamp delivers smooth gain control over the entire gain range. EQ Section Equalisation is split into three bands. The shelving HF control provides 15dB of cut or boost (gain adjustment) for frequencies above 12kHz. A swept mid frequency control enables frequencies from 150Hz to 3. 5kHz to be adjusted with up to 15dB of cut or boost at the selected frequency. Signals below 80Hz can be adjusted with the LF control, which features ±15dB of gain adjustment (cut or boost). Auxiliary Section Two (MFXi) or three (MPMi) Aux sends for sending separate monitor mixes in live applications, or for use with external effects. In the Master Section, each Aux bus has its own master level control and AFL. Monitor Outputs Available on balanced 1/4" jacks, the Headphone and Control Room monitor outputs feature independent level control. Mix Outputs The main left and right mix outputs are provided on balanced XLR connectors. Stereo Return (MFXi only) Available on 1/4" jacks with level control for use with external processors. Sub Groups Control over the Sub Groups comes via L-R Sub Group faders. The Sub Group outputs are 1/4" jacks Faders and Metering L-R Group faders control the Sub Group levels while overall stereo mix is handled by a single 60mm fader, with two 10-segment 3-colour LED peak-reading bargraph meters monitoring the mix left and right outputs. These meters normally follow the current monitor selection, so if any PFL button is pressed, the meters will switch to monitor this and the PFL Active LED will light.
MFXi Mono Input Channel
MFXi Stereo Input Channel
MFXi Master Section
MFXI - MPMI: THE DIFFERENCES
MFXi input channels feature an FX send to the internal Lexicon effects processor, along with 2 Aux sends for use with external processors, or to create a monitor mix. MFXi consoles include an additional stereo return to mix with its own level control. With no internal Lexicon effects, MPMi input channels replace the FX send with a third Aux send.
BLOCK DIAGRAMS
AUX 3 POST AUX2 POST AUX2 PRE AUX1 PRE GRP(RIGHT) GRP (LEFT) MIX(RIGHT) MIX(LEFT) PFL / AFL PFL / AFL ENABLE AUX1 (MASTER) AUX1 O/P
MONO CHANNEL (1 - 20 or 1 - 12 ALL IDENTICAL)
AFL
+48V `SP' PFL d/c MIC GAIN INSERT POINT TIP=SEND RING=RETURN MIX/SUB EQ PRE-FADER SIGNAL POST-FADER SIGNAL
d/c POST/PRE AFL
PAN AUX2 (MASTER)
AUX OUTPUTS
AUX2 O/P
MUTE LINE -15dB HPF `PK' LF MF & HF SWEEP
FADER
d/c
AUX3 (MASTER) AUX3 O/P
AUX1
AFL
d/c
AUX2
SOLO METERS R L
STEREO CHANNEL (STEREO 1 & 2 IDENTICAL)
GAIN `SP' EQ MUTE LEFT/MONO
AUX 3
MIX/SUB
+16 +10 +6 +3 0 -3 -6 -12 -16 -22
MONITOR & METERS
STEREO/ MONO
RIGHT LF MF HF FADER PFL BALANCE MONITORING SELECT (2 TRACK) MIX/SUB TO MONITOR `PK' d/c AUX1 MONITOR OUT LEVEL
STEREO H/PHONES HEADPHONES LEVEL
SUB TO MIX
MONITOR OUT L
MONITOR OUT R POST-FADER SIGNAL AUX2 PRE-FADER SIGNAL R L
REC OUT
MIX OUTPUTS
MIX/L OUT MONO OUTPUT
MIX FADER AUX 3
L
LEVEL SUB - L OUT
MIX/R OUT
2 TRACK IN
R
TO MIX
SUB-L FADER
SUB OUTPUTS
SUB - R OUT
SUB-R FADER
AUX2 POST AUX2 PRE AUX1 PRE GRP(RIGHT) GRP (LEFT) MIX(RIGHT) MIX(LEFT)
FX (POST)
PFL / AFL PFL / AFL ENABLE
AUX1 (MASTER) AUX1 O/P
AFL
d/c
AUX OUTPUTS
AUX2 O/P
MONO CHANNEL (1 - 20 or 1 - 12 or 1-8 ALL IDENTICAL)
+48V `SP' PFL d/c MIC GAIN INSERT POINT TIP=SEND RING=RETURN MIX/SUB EQ PRE-FADER SIGNAL POST-FADER SIGNAL
POST/PRE AFL
AUX2 (MASTER)
d/c
MUTE LINE -15dB HPF `PK' LF MF & HF SWEEP
PAN
(FX to AUX1 IS SIMILAR, EXCEPT FEED IS TO AUX1 PRE BUS ONLY)
FX to AUX2
FADER
MUTE
FX (ROTARY) AUX1
`SP'
IN
FX
OUT EFFECTS FADER FX BYPASS FOOTSWITCH
AFL d/c PFL
FX BUS O/P
AUX2
d/c
SOLO METERS R L
STEREO CHANNEL (STEREO 1 & 2 IDENTICAL)
GAIN `SP' EQ MUTE LEFT/MONO
FX
MIX/SUB
+16 +10 +6 +3 0 -3 -6 -12 -16 -22
MONITOR & METERS
STEREO/ MONO
RIGHT LF MF HF FADER PFL BALANCE MONITORING SELECT (2 TRACK) MIX/SUB TO MONITOR `PK' d/c AUX1 MONITOR OUT LEVEL
STEREO H/PHONES HEADPHONES LEVEL
SUB TO MIX
MONITOR OUT L
MONITOR OUT R POST-FADER SIGNAL AUX2 L
REC OUT
R
STEREO RETURN
LEVEL LEFT/MONO
PRE-FADER SIGNAL
MIX OUTPUTS
MIX/L OUT MONO OUTPUT
MIX FADER FX
RIGHT L LEVEL SUB - L OUT
MIX/R OUT
2 TRACK IN
R
TO MIX
SUB-L FADER
SUB OUTPUTS
SUB - R OUT
SUB-R FADER
MONO INPUT, STEREO INPUT & MASTER SECTION
MONO INPUT MODULE
Mic Input A female XLR connector accepts balanced or unbalanced mic signals. At -128. 5dbu EIN the mic amp is extremely quiet and transparent with excellent overload characteristics. Line Input A balanced 1/4" jack for connecting balanced or unbalanced electronic instruments, such as keyboards. Sensitivity A rotary control on each input alters the sensitivity of the input signal, with a gain range of 5 - 60dB. [. . . ] > 86dB HF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12kHz, +/-15dB MF (swept). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150Hz 3. 5kHz, +/-15dB LF. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Hz, +/-15dB Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SOUNDCRAFT FX16
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SOUNDCRAFT FX16 will begin.