User manual SOUNDCRAFT LEXICON STUDIO LDI-12T CONFIGURATION

[. . . ] 0dBFS = 18dBu 0 2 4 6 8 10 12 14 16 18 21 24 27 30 35 40 MIX dBFS RIGHT STE-1 STE-2 STEREO INPUTS SELECT EXIT 328 XD X XD MUTE IN FUNCTION IN S/ PD IF PARAMETER M ID I OU T IN W CL ORD OC OU K T D CL /SU OC PE R IN K W OR OU T OU T AE S/ EB U SOLO CHANNEL / GROUP LINK TH RU LEXICON STUDIO LDI-12T D 328XD AND LEXICON STUDIO LDI-12T Connecting the system 328XD Configuration LDI-12T Configuration 2 3 5 1 Soundcraft 328XD and Lexicon Studio LDI-12T CONNECTING THE SYSTEM Audio Connections Connect audio connections as shown in the diagram below. ADAT Optical cables must be connected from the ADAT Out port of the Lexicon Studio LDI-12T card to an ADAT In port of the 328XD and vice versa. [. . . ] Using the PARAM encoder beneath the display, scroll up or down until the `Tape Port Select' menu is highlighted. Press <ENTER> and press the Up cursor key until the `<Tape Ch17-24 >' menu page is displayed. Using the PARAM encoder set the Bank Source to ADAT. Press the Down cursor key once to set the wordlength. The Lexicon Studio LDI-12T is capable of 24-bit recording, and so for optimum results, 24-bit wordlength can be selected here. If your audio sequencer software does not allow 24-bit recording, 20-bit or 16-bit should be selected. The sequencer manuals should be consulted for further information. The wordlength is set on the 328XD with the PARAM encoder. Press <MENU> to return to the menu pages. S/PDIF Input The 328XD S/PDIF input can be routed to any one of the following inputs: ` Stereo Input 1; Stereo Input 2; FX Return 1; FX Return 2; 2 Track Tape Return, provided that the 328XD AES/EBU input or internal osciallator has not already been assigned to that input. Commonly the Lexicon Studio LDI-12T S/PDIF output would best be routed to a Stereo Input or the 2 Track Tape Return input. Soundcraft 328XD and Lexicon Studio LDI-12T 3 NOTE: Assigning a digital source to an input will override an analogue signal, if present. Press <MENU> to enter the menu pages, scroll through the pages until the `SPDIF I/P Setup' is highlighted and press <ENTER>. Using the PARAM encoder, select the destination for the S/PDIF input. Press <MENU> to return to the menu pages. NOTE: If the S/PDIF input is not required, NOWHERE should be selected in the menu. 4 Soundcraft 328XD and Lexicon Studio LDI-12T LDI-12T CONFIGURATION Wordclock The Lexicon Studio LDI-12T must now be set up to receive the wordclock transmitted by the 328XD. Open the Lexicon Studio Control Panel, by double clciking the Lexicon Studio icon in the taskbar. [. . . ] The in the `Output' settings select S/PDIF RCA / ADAT OPTICAL, this forces the Core32 to send audio from the ADAT port to the 328XD. Please refer to the Lexicon Studio documentation for other system settings. 6 Soundcraft 328XD and Lexicon Studio LDI-12T 7 Soundcraft 328XD and Lexicon Studio LDI-12T SOUNDCRAFT HARMAN INTERNATIONAL INDUSTRIES LTD CRANBORNE HOUSE CRANBORNE ROAD POTTERS BAR HERTS EN6 3JN UK TEL: +44 (0) 1707 665000 FAX: +44 (0) 1707 660742 EMAIL: info@soundcraft. com SOUNDCRAFT USA 1449 DONELSON PIKE NASHVILLE TN 37217 USA TEL: 1-615-360-0471 FAX: 1-615-360-0273 EMAIL: soundcraft-usa@harman. com www. soundcraft. com 8 Soundcraft 328XD and Lexicon Studio LDI-12T [. . . ]