User manual SOUNDCRAFT UREI 1605

[. . . ] Mixer Music Mixer User Guide 1 IMPORTANT Please read this manual carefully before using your mixer for the first time. © Harman International Industries Ltd. 2005 All rights reserved Parts of the design of this product may be protected by worldwide patents. ZM0336-01 Soundcraft is a trading division of Harman International Industries Ltd. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. [. . . ] The level of the signal is controlled by the level pot. The post-pot signal is assignable to the cross fader via the A/Master/B switch A/Master/B Switch This 3-position switch routes the return signal to one of three pairs of stereo buses. If the Master position is selected the signal is routed diretly to the booth and master outputs. If the A or B position is selected then the signal is routed via the cross fader. Master HPF The high-pass filter is selected by depressing the hpf switch. This affects the master and the booth outputs. Mono This switch, when depressed, sums the stereo signal to a mono signal. This affects the master and the booth outputs. Balance The balance controls allows the left/right balance of a stereo signal to be adjusted. Level The level of the master outputs is controlled via this pot. Cue Pressing this button routes the pre-level-control signal to the headphones and meters. A LED in the switch indicates when Cue is selected. 23 Booth EQ The booth eq has two bands. Both controls give a cut/boost of +/-6dB. Level The level of the booth outputs is controlled via this pot. Left/Stereo/Right This 3-position works as follows: left: mono signal is fed to booth left ouput only stereo: normal stereo right: mono signal is fed to booth right ouput only Dim When depressed this switch causes the booth outputs to be cut by 12dB. XF Curve The XF Curve pot allows the cross-fader law to be varied from `constant power' mode to `performance/scratch' mode. Headphones In normal mode the headphones circuit monitors the master left & right outputs. A cue switch anywhere on the desk is pressed the headphones will monitor the appropriate signal. Level The level pot controls the signal level sent to the headphones. EQ The single eq pot varies the headphones between dark and bright characteristics. Dark = treble cut and Bright = bass cut. Balance Pot The balance pot allows adjustment of the left/right balance of the stereo headphone signal. In split mode the balance pot becomes a mono cue/main pan control. In cue mode the balance control becomes a stereo cue/main balance control. Split Mode The split button, when depressed, activates split mode. [. . . ] Slip mat: Split Cue: Sub Bass: Tempo: Turntable: A fabric turntable mat positioned under the record so that the DJ can hold it stationary ready to let go for a fast start at the point cued. A facility to listen to the cue signal in one ear while keeping the program in the other. Used for matching the beat while cueing a new track. A loudspeaker designed to reproduce only very low frequency sound, typically from around 30 to 120Hz. [. . . ]