Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SOUNDCRAFT VI6 COBRANET. We hope that this SOUNDCRAFT VI6 COBRANET user guide will be useful to you.
Lastmanuals help download the user guide SOUNDCRAFT VI6 COBRANET.
Manual abstract: user guide SOUNDCRAFT VI6 COBRANETSETUP GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] The latest version of the program (3. 4. 2 or above) allows not only the monitoring of CobraNet device parameters, but also the configuration of settings such as bundle numbers, latency and bit depth. The program can be downloaded from the website www. cobranet. info/support follow the CobraNet software link on left hand side. [. . . ] Select `Use the following IP address' and type in the IP address and subnet mask as shown. If you are only connecting to the Vi6 CobraNet card it does not really matter what the actual IP address is, but it is recommended to set it as above. Click OK to close the TCP/IP dialogue box. In the Local Area Connection box, select the `Advanced' tab at the top, and then click the Windows Firewall `Settings' button:
Make sure the firewall is set to OFF. Click OK on all dialogues to exit the Local Area Connection properties. Note you will have to reverse the above settings 1-4 if you subsequently need to connect the laptop to a business LAN, so it is best to use a separate network port if available.
3. Setting up CobraNet Discovery to configure the Vi6 CobraNet® card
1. Power up the Vi6 and connect the laptop's Ethernet port to the Primary port on the ® CobraNet card. This should be done with a crossover Ethernet cable, but depending on the laptop, a `straight' cable can be used, if the laptop supports both cable types. Alternatively, a network switch can be connected between the Laptop and the CobraNet® card, in this case `straight' cables would be used. ® Using a switch also enables several other CobraNet devices to be connected to the laptop at the same time as the Vi6, and their configuration inspected and changed if necessary to match the Vi6. Both LEDs on the Cobranet should start flashing when connected to the laptop. [. . . ] The Conductor Priority parameter must be left at a value of 255. This is the highest priority and indicates that the Vi6 will always be the clock master for the entire network. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SOUNDCRAFT VI6 COBRANET
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SOUNDCRAFT VI6 COBRANET will begin.
