Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SPAL AS-80. We hope that this SPAL AS-80 user guide will be useful to you.
Lastmanuals help download the user guide SPAL AS-80.
Detailed instructions for use are in the User's Guide.
[. . . ] TEMPORARY DISENGAGEMENT OF AUDIBLE CHIRPS
If these are switched on, the alarm unit emits audible chirps every time the alarm unit is armed/disarmed. To temporarily disengage these signals, press button P3 from the remote control before pressing P2 (on) or P1 (off). Disengagement only refers to subsequent arming/disarming.
3x
3x
3. [. . . ] DISARMING
· Press button P1 of the remote control This is confirmed by 1 flash of the direction indicators and 1 audible chirp (if on) The doors are unlocked, the LED goes off and the dome light comes on (if programmed and connected). nx
n=number of enabled remote controls
12. VALET MODE
When valet mode is engaged, all the alarm functions are disengaged. The system is configured as simple remote-controlled locking unit. The VALET mode is indicated by continuous LED flashing, with dashboard on. ENTERING VALET MODE · Switch on the dashboard · Press buttons P1 and P2 at the same time for at least 2 seconds. The alarm unit gives 1 flash of the direction indicators and 1 audible chirp With the dashboard off, the LED flashes continuously
1x
1x
25 sec
ALARM MEMORY If, during the previous arming time, a cause of alarm has been found, when the alarm unit is disarmed, two audible chirps will be heard and the LED will flash in a codified sequence, indicating the cause of the alarm. ALARM MEMORY 2x
VALET MODE 2 sec 1x 1x
EXITING FROM VALET MODE · Switch on the dashboard · Press buttons P1 and P2 at the same time for at least 2 seconds. The alarm unit gives 1 flash of the direction indicators and 1 audible chirp VALET MODE 2 sec 1x 1x
5
ENGAGEMENT · With the dashboard switched on and doors LOCKED, press the P2 button from the remote control. AUTOMATIC DOOR LOCKING AT SWITCH-ON
If engaged, the alarm automatically locks the doors 10 seconds after the dashboard has switched on. When the dashboard switches off, the doors are automatically unlocked.
DISENGAGEMENT With the dashboard switched on and doors LOCKED, press the P1 button from the remote control. ANTI-CARJACK OFF
ANTI-CARJACK - OPERATION ACTIVE MODE - CARJACK DURING VEHICLE DRIVING · The LED comes on steady - anti-carjack on · Opening and closing of a door (the drivers is forced by the carjacker to leave the vehicle) The LED goes off and, after 20 seconds, starts to flash The alarm fails to respond to the remote control After 2 minutes, the control unit performs an alarm cycle, without arming the engine cut When the engine is next switched off, the engine cut engages · The only way to release the engine is to re-enable the remote control and enter the emergency disarming code PASSIVE MODE - CARJACK ON FETCHING VEHICLE · The LED comes on steady - anti-carjack on · Switch the engine off before opening a door · Exit from the car and lock it. The alarm works normally · On returning to the car, disarm the alarm by means of the remote control · Enter the emergency disarming code If the disarming code is not entered, the LED remains on steady The alarm fails to respond to the remote control After 2 minutes, the control unit performs an alarm cycle, without arming the engine cut When the engine is next switched off, the engine cut engages · The only way to release the engine is to re-enable the remote control and enter the emergency disarming code
10 sec
14. ALARM PASSIVE AUTOARMING
If engaged, the alarm engages automatically 30 seconds after the vehicle has been left (last door closed). The passive autoarming of the alarm does not lock the doors and does not engage the electronic modules connected to the alarm unit, and is indicated in the same way as arming from remote control. ALARM ON 30 sec DISARMING With the alarm unit armed in passive mode, when a door is opened, an intermittent audible chirp is heard lasting 10 seconds, during which time the alarm unit can be disarmed before this generates an alarm cycle.
10 sec
15. ENGINE CUT PASSIVE AUTOARMING
If engaged, the alarm automatically cuts the engine 90 seconds after the dashboard switches off. Passive arming of the engine cut is indicated by the LEDs coming on with short switchoffs.
6
19. [. . . ] The LED goes off - SECOND FIGURE ENTERED · Switch off the dashboard The LED starts to flash again . . . · Repeat the operation for all four figures of the emergency disarming code. After entering the fourth exact figure, the control unit goes off, unlocking the doors
90 sec
3x
3x
18. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE SPAL AS-80
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual SPAL AS-80 will begin.