User manual SPECTRONIQ PLTV-26M

[. . . ] OMPLTV26M_27M_32M. book Page i Monday, October 10, 2005 11:44 AM PLTV-26M/27M/32M 26/27/32" Liquid Crystal Display User's Manual OMPLTV26M_27M_32M. book Page ii Monday, October 10, 2005 11:44 AM Protron PLTV-26M/27M/32M Liquid Crystal Display User's Manual. © 2005 Protron Digital Corporation. Under copyright law, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Protron Digital Corporation. Disclaimer Protron Digital Corporation has reviewed this manual and provides it only as a guide to operation. [. . . ] Release the tab and pull the enclosure out of the remote. Remove the old batteries and replace them with the new batteries. Ensure the batteries are oriented as indicated in the enclosure. Snap the enclosure back into the remote. 13 OMPLTV26M_27M_32M. book Page 14 Monday, October 10, 2005 11:44 AM Configuring the Display The On-Screen Display (OSD) allows you to configure the operation of the LCD. You can change video and audio settings, activate and configure Picture-in-Picture (PIP) and closed captioning, select television channels, control access to mature programming, and configure other general display behavior. Press the MENU button on the remote or the top of the display. Once the OSD appears, use the at the top of the OSD. Use the and and buttons to navigate the menus represented by icons 3. Press the ENTER button to enter the selected menu. Press the ENTER button to select the desired item. If no text is displayed next to the item name, a sub-menu will appear upon pressing ENTER. Repeat steps 4 and 5 to navigate the sub-menu. If the selected item is an adjustable parameter, one of two things will happen: A pop-up box will appear, in which case use ENTER to accept the value. and to adjust the parameter and then press The parameter will edit in place, in which case use and to adjust the value and then press ENTER to accept. While editing the parameter, a check mark will show next to the currently selected value. Note: The currently selected source determines which menus are available in the OSD. The following table lists the menus available for each source: Menu Source TV AV1 AV2 AV3 S-Video YPbPr1 YPbPr2 VGA DVI Video · · · · · · · Audio · · · · · · · · · Misc. · · · · · · · · · · · TV · PC 14 OMPLTV26M_27M_32M. book Page 15 Monday, October 10, 2005 11:44 AM Configuring the Display Video The Video menu allows you to change the display's video settings. You can adjust the following parameters: Contrast Sets the variation between light and dark colors Brightness Sets the brightness of the display image Saturation Sets the saturation of color in the display image Hue Sets the intensity of color in the display image Sharpness Sets the image sharpness Flesh Tone Turns on and off image filtering to improve flesh tones in the image Color Temperature Sets the color temperature used by the display: Cool, Normal, Warm, or a user-defined setting. To set the user-defined color temperature, select the User option and adjust the levels of red, green, and blue to be used to produce white. Use and to select a color, then use and to adjust the level. 0 0 0 Video Select Exit MENU Contrast Brightness Saturation Hue Sharpness Flesh Tone Color Temperature 50 50 50 50 30 ON Warm Audio The Audio menu allows you to change the way audio is played, including balance, equalization, and other sound processing. You can change the following settings: Bass Adjusts the volume of bass in the audio Treble Adjusts the volume of treble in the audio Balance Sets the relative volumes of the left and right speakers Surround Turns surround sound simulation on and off Bass Treble Balance Surround Equalizer1 Equalizer2 MTS Speakers 50 50 0 OFF OFF OFF Stereo ON Audio Select Exit MENU 15 OMPLTV26M_27M_32M. book Page 16 Monday, October 10, 2005 11:44 AM Configuring the Display Equalizer 1 Selects the preset used for the first equalizer, which is designed to compensate for the room in which the display is located: Church, Arena, Cave, Bathroom, Hall, Living Room, Concert, or Off (no equalization) Equalizer 2 Selects the preset used for the second equalizer, which is designed to enhance the type of audio being played: Soft, Classic, Techno, Dance, Live, Pop, Rock, or Off (no equalization) MTS Selects the MTS (Multichannel Television Sound) channel played back while watching television: Mono, Stereo, or SAP (Secondary Audio Programming) Speakers Turns the built-in speakers on and off Miscellaneous The Miscellaneous menu contains general display settings, including OSD options, timers, display format, closed captioning, Picture-in-Picture, and parental controls. [. . . ] · Ordinary adjustments as outlined in the owner's manual that can be performed by the customer. · Damage to equipment not properly connected to the product. · Any cost incurred in shipping the product for repair. · Signal reception problems caused by external antenna, cable systems, or interference. [. . . ]