User manual SPECTRONIQ PLTV-3250

[. . . ] OMPLTV3250-1. book Page i Monday, July 17, 2006 8:15 PM PLTV-3250 32" Liquid Crystal Display User's Manual MENU CH CH VOL VOL ENTER SOURCE POWER OMPLTV3250-1. book Page ii Monday, July 17, 2006 8:15 PM Protron PLTV-3250 Liquid Crystal Display User's Manual. © 2006 Protron Digital Corporation. Under copyright law, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Protron Digital Corporation. Disclaimer Protron Digital Corporation has reviewed this manual and provides it only as a guide to operation. [. . . ] Press the ENTER button to select the desired item. If a sub-menu appears upon pressing ENTER, repeat steps 4 and 5 to select an item on the sub-menu. Otherwise, use and to adjust the parameter and then press ENTER to accept the value. Press MENU to exit a menu and then, finally, to exit the OSD. 16 OMPLTV3250-1. book Page 17 Monday, July 17, 2006 8:15 PM Configuring the Display Note: The currently selected source determines which menus are available in the OSD. The following table lists the menus available for each source: Menu Source TV Component1 Component2 AV1 AV2 HDMI S-Video VGA · Image · · · · · Audio · · · · · · · · · · TV · PC Setup · · · · · · · · Image The Image menu allows you to change the display's video settings. You can adjust the following parameters: Scheme Selects a display scheme for different video types: Normal, Vivid, Sports, or Nature. Brightness Sets the brightness of the display image. Contrast Sets the variation between light and dark colors. Hue Sets the intensity of color in the display image. Saturation Sets the saturation of color in the display image. Color Temperature Sets the color temperature used by the display: Warm, Normal, Cool, or a user-defined setting (User). To set the user-defined color temperature, select the User option and adjust the levels of red, green, and blue to be used to produce white. 17 OMPLTV3250-1. book Page 18 Monday, July 17, 2006 8:15 PM Configuring the Display Aspect Ratio Controls the aspect ratio used by the display: Full (16:9--widescreen) or 4:3. FULL 4:3 Audio The Audio menu allows you to change the way audio is played, including balance, equalization, and other sound processing. You can change the following settings: Volume Adjusts the speaker volume. Bass Adjusts the volume of bass in the audio. Treble Adjusts the volume of treble in the audio. Balance Sets the relative volumes of the left and right speakers. Auto Volume Turns automatic volume adjustment, used to compensate for program sound level variation, on and off. MTS (TV only) Selects the MTS (Multichannel Television Sound) channel played back while watching television: Auto, Mono, Stereo, or SAP (Secondary Audio Programming). Sound Field Selects a sound enhancement scheme: Normal, Music, Speech, Jazz Club, Concert, or Movie. HDMI Audio (HDMI only) Selects the source for HDMI audio: · HDMI--Audio carried by the HDMI cable · PC Phone Jack--Audio connected to the PC AUDIO IN jack 18 OMPLTV3250-1. book Page 19 Monday, July 17, 2006 8:15 PM Configuring the Display TV The TV menu allows you to select the television signal type and select which television channels are available for viewing, manually or automatically. It contains the following menu items: Auto Scan When selected, automatically scans all television channels for valid signals and makes unavailable any channels with insufficient signal strength. Channel System Sets the type of television signal source in use. [. . . ] If the issue cannot be resolved over the phone with trouble-shooting techniques, you may be eligible for warranty service. To request warranty repair, you may also contact us by e-mail at protron@ewestcsp. com. All warranties must be authorized by Protron prior to service and will result in the issuance of an authorization number for service. · For televisions with screen sizes of 37" or less, you will be requested to ship your television to our National Return Center. [. . . ]